Metal Detector Sensitivity Settings Chart
Look up the sensitivity scale of 14 Garrett, Minelab and Nokta detectors and pinpointers, with the maker's own adjustment advice for your conditions.
- Free
- No sign-up
- Runs in your browser
Estimates only · data checked November 2026 · About this data
Scales and quotes come from manufacturer manuals and spec pages checked November 2026. Firmware updates can change level counts; your own manual is the final word. No numeric starting values are given because the makers do not publish them per ground type.
Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.
Quick answer
A metal detector sensitivity chart shows how many sensitivity levels your detector has and what its maker says about setting them. Manufacturers do not publish one “right” number per ground type: Nokta advises the highest level without major popping, and Garrett advises lowering it when trash, mineralization or interference make the detector erratic.
How to use the sensitivity chart
- Choose your detector or pinpointer from the Detector model list. The chart covers 14 Garrett, Minelab and Nokta models.
- Pick the Hunting condition that best matches your site: mild soil, mineralized soil, wet salt beach or a high-EMI urban park.
- Read the result: the model’s sensitivity scale, a note for your condition, and, where the manual has it, the maker’s own words on when to raise or lower sensitivity.
- Scroll to the full table to compare scales across all covered models.
The tool deliberately shows “Not published by the maker” for a starting value. None of the manuals or spec pages behind this chart give a numeric setting per ground type, so we don’t make one up.
How sensitivity scales work, and the general adjustment principle
Sensitivity controls how strongly the detector responds to weak signals. Garrett’s manuals tie higher sensitivity to very small or very deep targets, and lower sensitivity to erratic behavior. Each brand uses its own scale, so a number on one detector means nothing on another. Compare a setting only to the top of its own range.
| Model | Sensitivity scale | Top of scale |
|---|---|---|
| Minelab MANTICORE | 1–35 | 35 |
| Nokta Simplex Ultra / Lite | 30 levels | 30 |
| Minelab EQUINOX 900 | 1–28 | 28 |
| Minelab EQUINOX 800 / X-TERRA PRO | 1–25 | 25 |
| Garrett ACE 300 / AT Gold / Vortex VX9 | 8 levels | 8 |
| Garrett PRO-POINTER AT | 3 levels | 3 |
Nokta’s Simplex Ultra/Lite manual puts it this way: “set the sensitivity to the highest level possible where no major popping sounds are heard to avoid missing smaller and deeper targets.” As a general adjustment principle, adapted from that Nokta guidance: aim for the highest sensitivity that remains stable without major popping. This is not a model-specific starting setting; consult your detector’s manual.
The SIMPLEX+ manual adds a tie-breaker: “if the noise level is suitable for searching and is the same at level 3 and 6, then 6 should be preferred.” In other words, if a higher level is no noisier, the manual prefers it. The same manual notes that sensitivity “is pre-defined for each mode”; the per-mode default numbers are not reproduced here because they could not be verified.
Sensitivity by ground type: what the manuals say
Mild soil. Garrett’s AT Gold manual says to “use higher sensitivity levels when searching for very small or very deep targets.” The ACE 300 manual uses near-identical wording.
Mineralized soil. Garrett’s AT Gold and ACE 300 manuals list “highly mineralized soils” as a reason to lower sensitivity, when erratic operation “cannot be resolved with discrimination, ground balance, or by changing frequency” (AT Gold wording; the ACE 300 names discrimination and frequency). Nokta’s Simplex Ultra/Lite manual says that if dropping sensitivity to 25 does not clear the noise, return sensitivity to where it was and increase the Ground Suppressor gradually instead.
Wet salt beach. No beach-specific sensitivity recommendation is stored for this chart. Consult your model’s manual for beach suitability and settings.
High-EMI urban parks. Nokta’s Simplex Ultra/Lite manual advises: “To obtain maximum depth performance, to eliminate the noise caused by electromagnetic interference, try shifting the frequency first.” Garrett lists electrical interference and “the presence of other metal detectors” as reasons to lower sensitivity when other adjustments do not resolve erratic operation. On the noise-cancel side, Minelab’s spec pages list Auto, Continuous Auto and Manual noise cancel for the EQUINOX 900, and Auto noise cancel for the X-TERRA PRO and VANQUISH 540. Follow your own manual for how and when to use these options.
For Minelab models, the Vortex VX9 and the pinpointers, the chart shows the published scale only. Check the owner’s manual for model-specific advice.
Methodology & sources
Every scale and quotation comes from the manufacturer’s own manual or spec page. Level counts were cross-checked against the UnearthKit dataset. Where sources conflict, the manual wins: UnearthKit lists the Nokta SIMPLEX+ at 6 levels, but the manual says 7, with level 7 added by a software update. We left out numeric per-mode defaults and third-party “best settings” charts because they could not be verified.
- Nokta SIMPLEX New Generation user manual (EN)
- Nokta SIMPLEX+ user manual (EN)
- Garrett AT Gold owner’s manual
- Garrett ACE 300 owner’s manual
- Garrett Vortex VX9 product page
- Garrett PRO-POINTER AT product page
- Minelab EQUINOX 900 tech specs
- Minelab EQUINOX 800 tech specs
- Minelab X-TERRA PRO tech specs
- Minelab MANTICORE tech specs
- Minelab VANQUISH 540 tech specs
- Minelab PRO-FIND 35 tech specs
- Nokta AccuPOINT product page
- Nokta PulseDive product page
- UnearthKit dataset (cross-check)
Last updated: November 2026
FAQ
What sensitivity should I set my metal detector to?
None of the manufacturer manuals and spec pages behind this chart publish a numeric starting value per ground type. Nokta’s Simplex manual says to set the sensitivity to the highest level possible where no major popping sounds are heard; check your own detector’s manual for model-specific advice.
When should I lower the sensitivity?
Garrett’s AT Gold and ACE 300 manuals say to lower it when the detector behaves erratically because of excessive metallic trash, highly mineralized soil, electrical interference or other metal detectors nearby, and the problem cannot be fixed with discrimination or by changing frequency. The AT Gold manual also lists ground balance.
How many sensitivity levels does the Nokta Simplex+ have?
The Nokta SIMPLEX+ manual lists 7 levels, noting that level 7 was added after release by a software update. Detectors on earlier firmware show 6 levels.
What should I do about electrical interference in a park?
Nokta’s Simplex Ultra/Lite manual says to try shifting the frequency first to eliminate noise caused by electromagnetic interference and obtain maximum depth. Garrett’s manuals list electrical interference as a reason to lower sensitivity if other adjustments do not resolve erratic operation.
Are higher sensitivity numbers on one brand the same as on another?
No. Each maker uses its own scale (for example 1–28 on the EQUINOX 900 and 8 levels on the ACE 300), so a number cannot be carried across brands. Compare a setting only to the top of its own scale.
More free tools
Beach & Water Hunt Waterproof Depth Checker
Compare your metal detector's stated waterproof rating with your planned beach or water hunt, checking detector, coil and headphones.
Digging Tool Selector by Ground Type
Pick your ground, hunt type and carry preference to see which digging tool types (shovel, trowel, hori hori, Lesche, scoop) fit best.
Gold Weight and Value Calculator
Convert gold between grains, grams, pennyweight and troy ounces, apply karat or fineness, and estimate value from a spot price you enter.
