Beach & Water Hunt Waterproof Depth Checker
Compare your metal detector's stated waterproof rating with your planned beach or water hunt, checking detector, coil and headphones.
- Free
- No sign-up
- Runs in your browser
Estimates only · data checked November 2026 · About this data
This checker compares numbers only. It does not replace your detector's manual or warranty terms, and it never treats a kit as safe beyond the manufacturer's stated rating and scope.
Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.
Quick answer
A metal detector waterproof depth checker compares the manufacturer’s stated waterproof rating with how deep you plan to hunt. It then checks the coil and headphones too, so you get one verdict for the whole kit: OK, CAUTION, NO-GO or CHECK MANUFACTURER.
How to use the waterproof depth checker
- Pick a preset model if yours is listed. This fills in the manufacturer’s stated rating and its scope (whole detector or coil only), and resets the headphone type to “Unknown” so you can set it yourself.
- Otherwise choose feet or meters and enter the rated depth from your detector’s spec page. You can also choose “Not waterproof / splash only” or “I don’t know.”
- Set what the rating covers: the whole detector, the coil only, or “scope not stated.” Changing the rating or its scope after picking a preset turns it into your own entry, and the result no longer cites the preset source.
- Enter your planned hunt depth and choose the zone: dry sand, wet sand, shallows or submerged.
- Choose your search coil rating and headphone type, then press “Check my kit.”
The result shows the final verdict, one line each for the detector, coil and headphones, and a recovery-gear suggestion for the zone. When you use a preset, it also names the manufacturer page the rating came from, plus the date the preset ratings were checked. Switching units converts the numbers on screen, but the checker always compares the original values, so toggling between feet and meters never changes the verdict.
How the verdict is worked out
Both depths are converted to meters (m = ft × 0.3048, the exact definition of the foot) and compared. In wet sand, the shallows or underwater, the detector passes only if the planned depth does not exceed the rated depth. If the two depths are equal, the verdict is OK, flagged “at the limit of the stated rating.” Dry sand is always OK for water rating, and any planned depth is ignored there.
A rating of 0 or “not waterproof” is a NO-GO anywhere wetter than dry sand. An unknown rating, or a rating whose scope is not stated, returns CHECK MANUFACTURER. When a maker lists both a metric and an imperial figure that are not exact conversions (for example 60 m and 200 ft), the checker compares against the stricter of the two.
The coil and headphones are then checked separately. The final verdict is the worst of the three results.
| Example | Rated | Planned | Verdict |
|---|---|---|---|
| Whole detector, submerged | 16 ft (4.88 m) | 10 ft (3.05 m) | OK |
| Whole detector, submerged | 3 m | 4 m | NO-GO |
| Whole detector, submerged | 5 m | 5 m | OK, at the limit |
| Coil-only rating, shallows | 1 m | 0.3 m | CAUTION (keep control box above water) |
| Non-waterproof headphones, shallows | 16 ft | 2 ft | NO-GO |
Are all metal detectors waterproof? Terrain zones and the whole kit
No. Ratings differ widely, so always check the manufacturer’s stated rating and what it covers. For example, Minelab states the EQUINOX 900 is “Waterproof – 5 m (16 ft), IP68.” The VANQUISH 540, by contrast, is listed as “Coil Waterproof – 1 m (3.3 ft)”: only the coil is rated, not the control box.
The checker uses four zones:
- Dry sand: no intended water contact. Sand and moisture still apply.
- Wet sand: splash and wash contact.
- Shallows: the coil and lower shaft are in the water.
- Submerged: the whole kit is under water.
The coil and headphones matter as much as the detector body. A non-waterproof coil gets a CAUTION flag in wet sand and is a NO-GO in the shallows or underwater. Non-waterproof headphones, wired or wireless, follow the same rule. Speaker-only use is not flagged.
For waterproof wireless headphones, the checker makes no claim about signal underwater. It asks you to confirm underwater use with the headphone manufacturer. Fisher states the CZ-21 “includes permanently attached waterproof headphones.” Garrett’s AT Pro page says it “Includes wired MS-2 headphones” but does not state that they are waterproof.
Recovery gear suggestions follow our sand scoop guide:
- Dry sand: a lightweight, rust-free plastic scoop, or a sand sifter.
- Wet sand: a more rugged metal scoop.
- Shallows: a metal scoop intended for water recovery.
- Submerged: a long-handle scoop.
To compare options, see our best beach sand sifters and best long handle beach sand scoops roundups.
Methodology & sources
Preset ratings are quoted from each manufacturer’s page and were cross-checked against the UnearthKit dataset. Where the two disagreed (GO-FIND 11), the manufacturer value is used. No rating comes from retail listings or reviews. Preset ratings checked 2026-11-09.
The Fisher CZ-21 is rated in feet only (250 ft); any metric figure shown is a conversion of that number, so see the maker page for details. Recommended review schedule: re-check preset ratings quarterly and whenever a manufacturer revises a model.
- Minelab EQUINOX 900 tech specs: 5 m (16 ft), whole detector (accessed November 2026)
- Minelab EQUINOX 800 tech specs: 3 m (10 ft) (accessed November 2026)
- Minelab X-TERRA PRO tech specs: 5 m (16 ft) (accessed November 2026)
- Minelab MANTICORE tech specs: 5 m (16 ft) (accessed November 2026)
- Minelab VANQUISH 540 tech specs: coil 1 m (3.3 ft) (accessed November 2026)
- Minelab GO-FIND 11 product page: coil 0.6 m (2 ft) (accessed November 2026)
- Nokta SIMPLEX ULTRA product page: 5 m (16 ft) (accessed November 2026)
- Nokta PulseDive product page: 60 m (200 ft) (accessed November 2026)
- Garrett AT Pro product page: control box 10 ft (3 m) (accessed November 2026)
- Garrett Vortex VX9 product page: 16 ft (5 m) (accessed November 2026)
- Fisher CZ-21 product page (First Texas Products): 250 ft (accessed November 2026)
- UnearthKit dataset: cross-check only
- Wikipedia: Foot (unit): 1 ft = 0.3048 m exactly
- How to Choose a Sand Scoop for Metal Detecting: scoop type per zone
This checker does not replace your manual or warranty terms. Last updated: November 2026.
FAQ
Are all metal detectors waterproof?
No. Some are fully submersible to a stated depth, some have only a waterproof coil, and some are splash-resistant at most. Always check the rating and its scope on the manufacturer’s page.
What does a coil-only waterproof rating mean?
Only the search coil is rated for water, not the control box. Keep the control box dry and above the water, so a coil-only detector is not suitable for fully submerged hunting.
Do wireless headphones work underwater?
This checker makes no claim either way. If you plan to use wireless headphones in the shallows or underwater, confirm underwater use with the headphone manufacturer.
Is it OK if my planned depth equals the rated depth?
The checker returns OK but flags that you are at the limit of the stated rating. Going beyond the manufacturer’s stated rating is a NO-GO.
Does this checker replace the manual or warranty terms?
No. It compares the numbers you enter or a manufacturer-stated preset rating. Your detector’s manual and warranty terms always take priority.
Related guides
More free tools
Digging Tool Selector by Ground Type
Pick your ground, hunt type and carry preference to see which digging tool types (shovel, trowel, hori hori, Lesche, scoop) fit best.
Gold Weight and Value Calculator
Convert gold between grains, grams, pennyweight and troy ounces, apply karat or fineness, and estimate value from a spot price you enter.
Kids' Metal Detector Size & Age Finder
Enter your child's age, water plans and budget to see kids' metal detectors whose listings match, with listed shaft lengths and water labels.
