10 Best Waterproof Metal Detectors for 2026

Minelab X-Terra Elite Detector is the best overall pick for beach hunters who want a fully submersible detector with Multi-IQ and a Beach mode. For more beach and shallow-water options, consider Minelab X-Terra PRO Detector and Minelab Vanquish 360 Detector; for freshwater relic hunting, Garrett AT Pro Detector is another choice.
For deeper diving, OMMO Underwater Metal Detector has a 60 ft rating, while Underwater IP68 Metal Detector claims 100 ft. Minelab X-Terra Intrepid Detector and Raynesys Outdoor Metal Detector suit shallow-water searches with submersible coils; RipTic Metal Detector and Professional Underwater Metal Detector round out the options.
Choose by full-detector submersion depth, then compare saltwater features and detection technology for your conditions. Coil coverage, target ID, pinpointing, and underwater audio also affect how practical a detector is in the water.
The comparison table covers waterproof coverage, detection technology, and detection features.
Our top picks for waterproof metal detectors
- Best Overall: Minelab X-Terra Elite Detector is suited to beach, wet-sand, and shallow-water coin and jewelry hunters who want simultaneous multi-frequency and two coils
- Best for All-Terrain Wading: Minelab X-Terra PRO Detector suits wading and beach hunters who want a fully submersible detector
- Best for Beginner Beaches: Minelab Vanquish 360 Detector suits beginners who want a lightweight waterproof detector for parks and beaches
How to Choose a Waterproof Metal Detector
Check what the waterproof rating covers
A waterproof coil doesn’t make the whole detector safe to submerge. For underwater hunting, look for a rating that applies to the complete detector, and treat the control pod and audio connection as part of the setup. Garrett rates its AT Series detectors for submersion, while its guidance calls for compatible submersible headphones when the audio connection goes underwater. Check the whole detector, not just the coil or a water-resistance label.
IP68 alone doesn’t tell you how deep a detector can go. Follow the model’s stated submersion depth: the Legend 2, Equinox 700, and Vortex VX9 are each rated to 5 m (16 ft), while the Excalibur II is rated to 60 m (200 ft).
Match rated depth to your water use
Choose a depth rating that covers where you plan to hunt, with room for your intended dives. Deeper diving calls for a model with a deeper stated rating. Match depth to your hunt, rather than assuming a rating applies equally to every detector.
The 60 m (200 ft) rating doesn’t make the Excalibur II a better choice for shallow-water hunting if you don’t need that depth.
Choose detection technology for the conditions
Frequency and detection technology can affect how well a detector suits your hunt. The Legend 2, Equinox 700, and Vortex VX9 use simultaneous multi-frequency detection, while Garrett’s AT Series uses model-specific single-frequency VLF technology. Compare the technology to your conditions, especially if you’ll hunt both land and water.
For a detector you’ll use in different settings, look for technology paired with modes that fit those settings. The Equinox 700 combines simultaneous Multi-IQ with Park, Field, and Beach modes. A single-frequency detector can still suit your plans; the key is matching its stated capabilities to the places you’ll search.
Look for saltwater and beach modes
Wet salt sand and surf require saltwater capability. The Vortex VX9 includes Multi-Salt for those conditions, and the Legend 2 and Excalibur II are suited to beach or saltwater use. Prioritize saltwater features if you’ll hunt wet beaches or surf.
Look for a Beach mode, but check that its features match your planned hunt. Dry sand, wet sand, and surf are different conditions. The Equinox 700 has a Beach mode, and the Legend 2 is suitable for beaches and shallow water.
Compare coil, target ID, and pinpointing features
Think about how you’ll search before comparing coil size. A smaller coil can be a practical choice when you need to work around obstacles; a larger coil can suit open ground. Match the coil to your search area, and weigh maneuverability against the coverage you want.
Target ID and pinpointing features can help you decide where to dig and narrow down a target’s location. Compare what each detector offers, then consider how much control you want during a search. Choose features for your hunt, rather than adding options you won’t use.
Plan for underwater audio and handling
Underwater audio needs its own check. Wireless audio on the Equinox 700 isn’t suitable underwater; waterproof headphones are recommended for full submersion. Garrett also advises compatible submersible headphones when the audio connection goes underwater. Plan for underwater headphones if you’ll submerge the detector.
Think through handling as well as depth: you’ll need to manage the detector, headphones, and controls during the search. Choose a setup whose stated submersion rating and audio arrangement fit the water you plan to hunt.
| Minelab X-Terra Elite Detector | ![]() | Best Overall | Waterproof coverage: Detector submersible; 2024 | Detection technology: Multi-IQ Multi-Frequency | Detection features: Precision targeting, iron control, 119 Target IDs | VIEW LATEST PRICE | Read Our Analysis |
| Minelab X-Terra PRO Detector | ![]() | Best for All-Terrain Wading | Waterproof coverage: Entire detector, including control pod | Detection technology: Selectable single-frequency VLF | Detection features: 6 profiles; 30 discrimination segments | VIEW LATEST PRICE | Read Our Analysis |
| Minelab Vanquish 360 Detector | ![]() | Best for Beginner Beaches | Waterproof coverage: Detector and coil fully waterproof | Detection technology: Multi-IQ simultaneous multi-frequency | Detection features: 3 modes; 119 Target IDs | VIEW LATEST PRICE | Read Our Analysis |
| Garrett AT Pro Detector | ![]() | Best for Freshwater Relics | Waterproof coverage: Detector submersible; headphones not | Detection technology: 15 kHz single-frequency VLF | Detection features: Pro audio, Iron Audio, ID 0-99 | VIEW LATEST PRICE | Read Our Analysis |
| OMMO Underwater Metal Detector | ![]() | Best for Deep Diving | Waterproof coverage: Fully submersible; listing says IP68 | Detection technology: Advanced sensing technology | Detection features: All-metal detection; pinpointing | VIEW LATEST PRICE | Read Our Analysis |
| Underwater IP68 Metal Detector | ![]() | Best for Casual Shorelines | Waterproof coverage: Full submersion claimed | Detection technology: Advanced technology | Detection features: All-metal detection; high-sensitivity coil | VIEW LATEST PRICE | Read Our Analysis |
| Minelab X-Terra Intrepid Detector | ![]() | Best for Shallow-Water Beginners | Waterproof coverage: 10-inch coil only | Detection technology: Smart Target ID | Detection features: 2 modes, Target ID, pinpoint | VIEW LATEST PRICE | Read Our Analysis |
| Raynesys Outdoor Metal Detector | ![]() | Best for Family Beach Hunts | Waterproof coverage: Search coil only; shallow water | Detection technology: DSP chip | Detection features: 5 modes; target type and depth display | VIEW LATEST PRICE | Read Our Analysis |
| RipTic Metal Detector | ![]() | Best for Shoreline Beginners | Waterproof coverage: 10-inch IP68 coil only | Detection technology: DSP technology | Detection features: 5 modes; DSP; pinpoint | VIEW LATEST PRICE | Read Our Analysis |
| Professional Underwater Metal Detector | ![]() | Best for Handheld Pinpointing | Waterproof coverage: Fully submersible | Detection technology: High-sensitivity detection system | Detection features: Wide-area scan; pinpoint; visual and vibration alerts | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
Minelab X-Terra Elite Detector
Beach and shallow-water coin hunters get an all-around choice with Multi-IQ and two coils. The Minelab X-Terra Elite uses simultaneous multi-frequency detection with an 8×5-inch V8X or 12×9-inch V12X coil. Submersible to 16 ft, it has Beach mode for wet-sand and shallow-water hunts. Its 119 target IDs distinguish ferrous from non-ferrous targets.
All-tone audio works through built-in speakers or ML85 wireless headphones, and the PRO-FIND 40 pinpointer uses DIF technology to reduce detector interference. Owners praised the larger coil’s test-garden performance and the detector’s ergonomics compared with a heavier unit. Another owner reported less stable IDs than on a previous detector, and fixed ID-bin boundaries limit adjustment.
Pros: Forum owner reported good depth and target ID at depth on beach hunts (2024) · Expedition-pack owner reported strong test-garden performance with the larger coil (2025) · Owner praised ergonomics compared with a heavier detector (2024).
Cons: One owner found target IDs less stable than on their previous detector (2024) · An owner said the fixed target-ID bin boundaries limited adjustment options (2024).
Skip it if: you want to set custom target-ID bin boundaries for more precise classification.
- Waterproof coverage:Detector submersible; 2024
- Rated depth:16 ft
- Detection technology:Multi-IQ Multi-Frequency
- Saltwater mode:Beach mode; 2024
- Coil size:12×9 in; 8×5 in; 2024
- Detection features:Precision targeting, iron control, 119 Target IDs
- Underwater audio:All-tone audio
- Weight:—
Minelab X-Terra PRO Detector
At 16 ft, the fully submersible X-Terra PRO suits wading hunters moving between park, field, and beach. For shoppers comparing best waterproof metal detectors, its sealed control pod and terrain modes support hunting in varied conditions. Full-detector waterproofing means the control pod can go underwater, while Beach mode runs at 8 kHz.
The 2.9 lb detector has a three-piece shaft that collapses to 25 in, making it easier to pack for a shoreline trip. Red display and keypad backlights, a built-in flashlight, and handgrip vibration help in low light and underwater. Thirty discrimination segments let you adjust which targets the detector accepts, and a dedicated Pinpoint mode helps locate a target.
Owners report stable beach and surf use, though target-ID numbers can jump. Waterproof headphones are sold separately, so underwater audio requires an extra purchase.
Pros: Stable beach and surf use · Handgrip vibration in water · Owners describe the detector as light and comfortable.
Cons: Target-ID numbers can jump · Single-frequency design is not simultaneous multi-frequency.
Skip it if: you need simultaneous multi-frequency detection; this model operates on one selectable VLF frequency at a time.
- Waterproof coverage:Entire detector, including control pod
- Rated depth:16 ft (5 m)
- Detection technology:Selectable single-frequency VLF
- Saltwater mode:Beach modes; 8 kHz
- Coil size:12 in
- Detection features:6 profiles; 30 discrimination segments
- Underwater audio:Waterproof headphones sold separately
- Weight:2.9 lb
Minelab Vanquish 360 Detector
For beginners who want to search beaches, this detector pairs simple controls with a dedicated Beach mode. It suits starter beach hunts where you want pinpointing and a waterproof coil without carrying a heavier setup. Among the best waterproof metal detectors for shallow-water searches, it offers full-detector submersion rather than coil-only protection. Multi-IQ runs multiple frequencies at once, while Park and All Metal modes cover other search areas.
The 2.6-pound weight makes it easier to carry, and its 16-foot submersion rating covers shoreline and underwater searches. A 10-by-7-inch waterproof coil and dedicated pinpoint function help you scan and locate targets. The rechargeable battery runs for up to 10 hours.
Owners report easy controls and good battery life, though target IDs can shift across repeated sweeps, and old nails or wires can produce inconsistent high IDs. That can make a questionable beach signal harder to judge.
Pros: Good battery life · Finding targets around 20 cm deep.
Cons: Inconsistent high target IDs on old nails and wires · Target IDs can change across repeated sweeps.
Skip it if: you need reliable high target IDs on old nails and wires; owners report inconsistent readings.
- Waterproof coverage:Detector and coil fully waterproof
- Rated depth:16 ft
- Detection technology:Multi-IQ simultaneous multi-frequency
- Saltwater mode:Beach mode
- Coil size:10 x 7 in
- Detection features:3 modes; 119 Target IDs
- Underwater audio:Built-in speaker; wired 3.5 mm headphone output
- Weight:2.6 lbs
Garrett AT Pro Detector
Unlike the Minelab X-Terra PRO Detector, the Garrett AT Pro suits freshwater relic hunters working shallow water. Its 10-ft submersion rating supports shallow-water hunting, while a 15 kHz single-frequency VLF setup and 8.5 x 11 in DD coil handle land and wet-ground searches. Proportional audio and Tone Roll help you judge target response; the 0-to-99 digital ID and 40 iron-discrimination levels help separate potential finds from iron.
Fast Track automatic ground balance and wired MS-2 headphones come with the detector. The headphones aren’t rated for immersion, so they can’t accompany you underwater; owners also report chatter on wet salt sand, where its single-frequency operation is less suited. Proportional audio gives more detail about target response, and fast recovery supports target separation. Its 10-ft limit makes it a shallow-water choice, not a detector for deeper dives.
Pros: Reliable freshwater use (2021) · Users praise its all-around land performance (2021) · Proportional audio helps judge target response (2026).
Cons: Chatter on wet salt sand (2024) · Single-frequency operation is less suited to saltwater (2024).
Skip it if: you plan to detect underwater with headphones, since the included MS-2 headphones aren’t rated for immersion.
- Waterproof coverage:Detector submersible; headphones not
- Rated depth:10 ft
- Detection technology:15 kHz single-frequency VLF
- Saltwater mode:—
- Coil size:8.5 x 11 in
- Detection features:Pro audio, Iron Audio, ID 0-99
- Underwater audio:MS-2 not underwater-rated
- Weight:3.03 lbs
OMMO Underwater Metal Detector
Choose this compact detector if you’re a beginner who needs deep-diving reach for beach or underwater hunts. The OMMO OM134 is fully submersible to 60 ft (18 m) and has an IP68 rating, making it a fit for diving, snorkeling, shallow water, and dry sand. It detects all metals, including coins, jewelry, and relics, with pinpointing to help locate targets.
Operation is designed to be simple, with an LCD display, sound mode underwater, and an anti-loss wrist strap. At 1.32 lbs, it’s a compact option to carry between shore and submerged searches. The strap adds security while you hunt underwater.
One owner reported poor performance, so results may disappoint if you expect consistent target detection. Its stated 60 ft depth makes it suited to deeper dives than detectors limited to shallow-water use.
Cons: One owner reported poor performance (2026).
Skip it if: you want owner feedback indicating consistently strong performance.
- Waterproof coverage:Fully submersible; listing says IP68
- Rated depth:60 ft (18 m)
- Detection technology:Advanced sensing technology
- Saltwater mode:—
- Coil size:—
- Detection features:All-metal detection; pinpointing
- Underwater audio:Sound mode available
- Weight:1.32 lbs
Underwater IP68 Metal Detector
Owners report mixed snorkeling results, while casual shoreline hunters get a lightweight detector for land and shallow-water searches. Its IP68 full-submersion design is rated to 100 ft, and its 4.1-inch high-sensitivity coil detects gold, silver, coins, relics, and other metals. The 0.3-pound unit includes a bonus battery and anti-loss wrist strap for recreational searches.
The Vietora Eud Underwater IP68 Metal Detector is designed for use on land, shorelines, or underwater, with the wrist strap to help keep it attached. It’s intended for adults, teens, and beginners, though one owner says it takes practice to get used to. Owners describe it as sturdy and report a gasketed battery cap, but another reported a leak and failure during first snorkeling use. The 100 ft rating makes it suited to shoreline and recreational underwater searches.
Pros: Owner said it found a dropped wedding ring in snow (2026) · Owner reported it worked well before a snorkeling leak (2026) · Owner described it as sturdy, with a gasketed battery cap (2026).
Cons: One owner reported a leak and failure during first snorkeling use (2026) · Owner feedback says it is not a professional-grade detector (2026).
Skip it if: you’re looking for professional-grade performance; owners say this model doesn’t meet that standard.
- Waterproof coverage:Full submersion claimed
- Rated depth:100 ft
- Detection technology:Advanced technology
- Saltwater mode:—
- Coil size:4.1 in
- Detection features:All-metal detection; high-sensitivity coil
- Underwater audio:—
- Weight:0.3 lb
Minelab X-Terra Intrepid Detector
Its 10-inch concentric coil makes the Minelab X-Terra Intrepid a shallow-water choice for beginners and teens, with the coil submersible to 3 ft. The detector itself isn’t fully submersible, so keep its control unit out of the water. Two hunting modes, a large numeric Smart Target ID display, and pinpoint mode help you identify and locate targets. Adjustable sensitivity and four discrimination segments let you reduce responses to common junk metals such as nails and bottle caps.
The adjustable shaft fits different users and collapses to 29.3 inches for storage. Two 9V alkaline batteries are included, and wired headphones work with its audio output but aren’t included. Pinpoint mode narrows target location, while the four-segment discrimination scale filters common junk.
Owners have reported false signals, including during beach use, and one advised reducing iron detection. Wet sand can also be a challenge, so this detector is better suited to dry ground and shallow-water searches than persistent wet-sand hunting.
Cons: Owner reported frequent false signals and difficulty trusting detections (2025 review) · Forum owner said the coil felt too heavy for the lightweight shaft (2024 forum post).
Skip it if: you need to take the whole detector underwater; only its coil can be submerged.
- Waterproof coverage:10-inch coil only
- Rated depth:3 ft
- Detection technology:Smart Target ID
- Saltwater mode:—
- Coil size:10 in
- Detection features:2 modes, Target ID, pinpoint
- Underwater audio:Wired headphones; not included
- Weight:—
Raynesys Outdoor Metal Detector
The stem adjusts from 19 to 59 inches, and the kit includes a shovel, backpack, and volume-adjustable headset. The backlit display helps in low light, and the two included 9V batteries mean you can start without sourcing batteries separately. The control box isn’t waterproof, so keep it out of the water; only the coil is intended for shallow-water use. The included backpack stores the detector after the stem retracts.
Pros: Owner review reports smooth operation · Owner review praises the size · At least a month of daily battery use.
Cons: A button would be better on top than on the side · Control unit is not waterproof, according to the review.
Skip it if: your underwater searches require a submerged control box.
- Waterproof coverage:Search coil only; shallow water
- Rated depth:12 in for a quarter coin
- Detection technology:DSP chip
- Saltwater mode:—
- Coil size:10 in
- Detection features:5 modes; target type and depth display
- Underwater audio:—
- Weight:—
RipTic Metal Detector
Shoreline beginners can sweep wet sand with the 10-inch IP68 water-resistant coil, while keeping the control unit dry. Five search modes cover All-Metal, Disc, Memory, Jewelry, and Pinpoint, so you can switch between broad searching and target recovery. DSP technology processes signals, and the detector has an advertised maximum detection depth of 10 inches. Its adjustable stock ranges from 19 to 50 inches, and the 6.4-pound detector comes with headphones, three batteries, a pinpointer, holster, digger, and backpack.
Owners report easy setup, quick pinpointer recovery, and successful shoreline use. The included accessories give you tools for locating and recovering targets, while the Pinpoint mode helps narrow down where to dig. One buyer wished target-metal identification were more accurate, so the five modes don’t guarantee precise identification. The control unit must stay out of water; only the coil is water-resistant.
Pros: Setup was easy · Owner found the pinpointer quick for recovery · The coil worked along the shoreline.
Cons: One buyer wished target-metal identification were more accurate · One buyer reported late delivery.
- Waterproof coverage:10-inch IP68 coil only
- Rated depth:Maximum detection depth: 10 in
- Detection technology:DSP technology
- Saltwater mode:—
- Coil size:10 in
- Detection features:5 modes; DSP; pinpoint
- Underwater audio:—
- Weight:6.4 lbs
Professional Underwater Metal Detector
This handheld detector suits underwater hunters who want wide-area scanning and pinpoint modes for faster target recovery. Its visual indicators and vibration alerts give you two ways to track a target in low visibility. The 4.4 lb unit has fully submersible construction and detects in saltwater, sand, and mineralized terrain. A high-sensitivity system is designed to respond in high-interference conditions.
The LSPWIEMFE Underwater has listed dimensions of 9 x 8 x 11 in. The depth rating is absent, so you can’t match its submersion limit to a planned dive. That missing depth figure is the main drawback for underwater use.
- Waterproof coverage:Fully submersible
- Rated depth:—
- Detection technology:High-sensitivity detection system
- Saltwater mode:Detects in saltwater
- Coil size:—
- Detection features:Wide-area scan; pinpoint; visual and vibration alerts
- Underwater audio:—
- Weight:4.4 lb
Waterproof Metal Detectors: Key Specs Side by Side
Here is how the 10 picks line up on waterproof coverage, rated depth, detection technology, coil size and detection features. Cells marked with a dash are specs the maker leaves out of its listing.
| Pick | Waterproof coverage | Rated depth | Detection technology | Coil size | Detection features |
|---|---|---|---|---|---|
| Minelab X-Terra Elite Detector | Detector submersible; 2024 | 16 ft | Multi-IQ Multi-Frequency | 12×9 in; 8×5 in; 2024 | Precision targeting, iron control, 119 Target IDs |
| Minelab X-Terra PRO Detector | Entire detector, including control pod | 16 ft (5 m) | Selectable single-frequency VLF | 12 in | 6 profiles; 30 discrimination segments |
| Minelab Vanquish 360 Detector | Detector and coil fully waterproof | 16 ft | Multi-IQ simultaneous multi-frequency | 10 x 7 in | 3 modes; 119 Target IDs |
| Garrett AT Pro Detector | Detector submersible; headphones not | 10 ft | 15 kHz single-frequency VLF | 8.5 x 11 in | Pro audio, Iron Audio, ID 0-99 |
| OMMO Underwater Metal Detector | Fully submersible; listing says IP68 | 60 ft (18 m) | Advanced sensing technology | — | All-metal detection; pinpointing |
| Underwater IP68 Metal Detector | Full submersion claimed | 100 ft | Advanced technology | 4.1 in | All-metal detection; high-sensitivity coil |
| Minelab X-Terra Intrepid Detector | 10-inch coil only | 3 ft | Smart Target ID | 10 in | 2 modes, Target ID, pinpoint |
| Raynesys Outdoor Metal Detector | Search coil only; shallow water | 12 in for a quarter coin | DSP chip | 10 in | 5 modes; target type and depth display |
| RipTic Metal Detector | 10-inch IP68 coil only | Maximum detection depth: 10 in | DSP technology | 10 in | 5 modes; DSP; pinpoint |
| Professional Underwater Metal Detector | Fully submersible | — | High-sensitivity detection system | — | Wide-area scan; pinpoint; visual and vibration alerts |
Frequently Asked Questions
How should I rinse and care for a metal detector after saltwater use?
Rinse the detector with fresh water after saltwater hunting, then dry it before storage. Keep the control pod, coil, and audio connection within their stated water limits, since a waterproof coil alone doesn’t make the full detector safe to submerge. Use compatible submersible headphones if the audio connection goes underwater.
Can I use a waterproof metal detector in heavy rain?
Yes, if the detector’s water protection covers the parts exposed to rain. A detector rated for full submersion offers more protection than one with only a waterproof coil, but its depth rating still applies to the complete setup. Keep audio equipment within its own water limits.
Can waterproof metal detectors detect gold underwater?
Yes, a waterproof detector can detect gold underwater when the detector and its audio setup are suited to submersion. Detection depends on the target and conditions; use a detector with target settings and pinpointing features suited to your search. For underwater audio, choose compatible submersible headphones.
How do I keep a metal detector secure while snorkeling?
Use a secure wrist or arm tether suited to your detector, and keep the shaft and controls within easy reach while snorkeling. A tether can reduce the chance of dropping the detector, but it doesn’t replace a suitable submersion rating or compatible underwater audio.
Do waterproof metal detectors need special maintenance after freshwater use?
Freshwater use generally calls for rinsing off dirt and debris, drying the detector, and storing it dry. Pay particular attention to the control pod and audio connections, and keep them within the detector’s stated water limits. Saltwater use needs a fresh-water rinse to remove salt residue.
Conclusion
Choose a detector by the water you’ll hunt: for shallow wading, prioritize full-detector submersion and a rating that covers your planned depth; for deeper dives, choose a model with a deeper stated rating. If you’ll hunt wet salt sand or surf, favor a stated saltwater feature, and plan for compatible underwater headphones when the audio connection goes underwater. Before settling on a setup, match its depth rating, saltwater capability, and audio arrangement to your hunt.
Sources
- garrett.com (garrett.com)
- The Legend 2 – Nokta Detectors (noktadetectors.com)
- usa.minelab.com (usa.minelab.com)
- garrett.com (garrett.com)
- usa.minelab.com (usa.minelab.com)
- usa.minelab.com (usa.minelab.com)
















