10 Best Deep Seeking Metal Detectors for 2026

The Minelab X-Terra PRO Metal Detector is the best overall pick for all-terrain searching, with three terrain modes and a waterproof design rated to 16 feet. For other needs, the PRO-Z60, CKG Treon, and Hazlewolke 14-Inch suit searches where stated depth claims and larger coils matter; the SAKOBS, ULHUND, and 12-Inch DD Coil models offer adjustable or portable setups; the Hazlewolke PX-17, Bebara, and ikiu add more options with different controls and coil features.
Choose by target, coil, ground conditions, and useful features such as ground balance, target ID, and pinpointing. Depth claims are conditional: target size, orientation, metal content, soil minerals, and conductivity can all affect detection depth.
The comparison table summarizes each model’s target focus, detector type, and claimed depth.
Our top picks for deep seeking metal detectors
- Best Overall: Minelab X-Terra PRO Metal Detector: Park, Field, and Beach search modes suit searches across different terrain
- Best for Gold and Coins: PRO-Z60 Metal Detector: a bundled gold-and-coin detector for beginners
- Best for Advanced Control: CKG Treon Metal Detector: settings let you fine-tune sensitivity, tones, ground balance, and discrimination
How to Choose a Deep Seeking Metal Detector
Match detector type to target size
Choose the detector style around what you want to find. Two-box systems favor large targets, such as caches and relics, while conventional search coils are better suited to smaller objects. A two-box setup uses separated transmitter and receiver coils to cover a broad area, but that configuration sacrifices sensitivity to small targets.
A useful size limit to keep in mind is about 3 inches (7.6 cm): two-box systems may be insensitive to objects smaller than that. If you’re searching for coins or other small items, a conventional coil is the better fit; don’t choose a large-target system based on its depth claims alone.
Compare coil size and configuration
A larger coil can suit larger targets, but bigger isn’t automatically better. For a coin-sized target, a conventional coil’s rough depth guidance is about the coil’s diameter. Treat that as a rule of thumb, not a promise for every coin or site.
As conventional coils grow beyond about 15 inches (38 cm), small-target detection declines. Match coil size to your likely targets: a very large coil may help with larger objects, while a smaller target can become harder to detect. Coil dimensions are only one part of the decision, since target size, orientation, metal content, soil minerals, and conductivity also affect detection depth.
Account for soil minerals and ground balance
Mineral content can change how a detector responds, so a depth estimate that looks precise may be misleading in mineralized soil. Mineralized ground can distort depth readings. Give more weight to a detector’s ground-handling features and realistic target fit than to a single advertised depth figure.
Treat depth claims as conditional
Advertised depth is not a guarantee across different targets and ground conditions. A large object may be detectable deeper than a coin, and a target’s shape, orientation, and metal content also affect the result.
Use stated depth claims as a comparison point, not as expected coin depth. A detector that displays estimated depth or a 3D target view may help you interpret a signal, but those features don’t establish a guaranteed maximum depth. Be especially cautious with estimates in mineralized ground, where readings can be inaccurate.
Check target ID and pinpointing features
Target ID and pinpointing help you decide what a signal may be and where to dig. Compare the available target information with your intended finds, and favor features that help you separate likely targets from unwanted signals. Detection depth still depends on target size, orientation, metal content, ground minerals, and conductivity.
Pinpointing can help narrow the signal’s location, while a depth display gives an estimate rather than a guarantee. Choose features that support your search goals, and remember that a clear target display doesn’t prove every small target will be detected at the claimed depth.
| Minelab X-Terra PRO Metal Detector | ![]() | Best Overall | Target focus: Treasure | Detector type: PRO-SWITCH engine | VIEW LATEST PRICE | Read Our Analysis | |
| PRO-Z60 Metal Detector | ![]() | Best for Gold and Coins | Target focus: Gold, coins, general-purpose | Detector type: Conventional single search coil | Claimed depth: 16 in (quarter) | VIEW LATEST PRICE | Read Our Analysis |
| CKG Treon Metal Detector | ![]() | Best for Advanced Control | Target focus: Coins, treasure, gold, jewelry | Claimed depth: Up to 2 m / 78 in | VIEW LATEST PRICE | Read Our Analysis | |
| Hazlewolke 14-Inch Metal Detector | ![]() | Best for Wide Coverage | Target focus: Hidden treasures | Detector type: Double-D Technology | Claimed depth: 13 in | VIEW LATEST PRICE | Read Our Analysis |
| SAKOBS Metal Detector | ![]() | Best for Portability | Target focus: Coins, jewelry, relics, general targets | Detector type: Conventional single-coil detector | Claimed depth: Up to 12.8 in | VIEW LATEST PRICE | Read Our Analysis |
| ULHUND Metal Detector | ![]() | Best for Adjustable Fit | Target focus: Coins, relics, jewelry, general metals | Detector type: Single-coil conventional detector | Claimed depth: 12.8 in (claimed) | VIEW LATEST PRICE | Read Our Analysis |
| Metal Detector 12-Inch DD Coil | ![]() | Best for Shallow Water | Target focus: Coins, relics, gold, general use | Detector type: Conventional 12-inch DD coil | Claimed depth: 12.8 in (manufacturer claim) | VIEW LATEST PRICE | Read Our Analysis |
| Hazlewolke PX-17 Metal Detector | ![]() | Best for Multiple Modes | Target focus: Quarter | Detector type: Double-D coil | Claimed depth: 10 in | VIEW LATEST PRICE | Read Our Analysis |
| Bebara Professional Metal Detector | ![]() | Best for Night Readability | Target focus: All Metal, Disc, Memory, Jewelry, PP | Detector type: 5-Mode Upgraded DSP chip | Claimed depth: 15 in | VIEW LATEST PRICE | Read Our Analysis |
| ikiu Professional Metal Detector | ![]() | Best for LCD Targeting | Target focus: Gold, silver | Detector type: DSP chip | Claimed depth: 10 in | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
Minelab X-Terra PRO Metal Detector
Park, field, and beach hunters who want one adaptable setup get an all-terrain choice with the Minelab X-Terra PRO. It has three terrain modes and an IP68 waterproof rating to 16 ft, so you can set a search mode for the ground you’re covering and take the detector into water. Its PRO-SWITCH engine lets you switch frequencies, while 30 discrimination segments help you control which targets you accept or ignore. Depth still depends on target size, orientation, metal content, ground minerals, and conductivity.
The three-piece shaft weighs 2.9 lb and packs down to 25 inches, making it easier to carry between sites. A large LCD, backlit keypad, control pod flashlight, and handgrip vibration support use in low light. Pinpoint mode helps narrow a target before digging, and five audio modes give you sound options. One practical limit is the 25-inch packed length, which may take up more room than a compact travel setup.
Skip it if: your detector needs to fit in a packed space shorter than 25 inches.
- Detector type:PRO-SWITCH engine
- Target focus:Treasure
- Claimed depth:—
- Coil size:—
- Ground balance:—
- Target ID:30 discrimination segments
PRO-Z60 Metal Detector
At 19.23 kHz, the PRO-Z60 suits beginners seeking a detector for small gold and coins. The single search coil has a claimed depth of 16 inches on a quarter; actual depth varies with target size, metal type, and soil minerals. Ground balance is included, and the large LCD has a toggleable backlight. The adjustable stem runs from 25 to 53 inches and collapses to 27 inches for carrying.
Assembly is easy, and the included backpack, pinpointer, shovel, headphones, and 2 batteries make for a ready-to-carry kit. Reviews report finds including rings, coins, and relics, though some say the included headphones feel low-quality and the pinpointer disappoints. The collapsible 27-inch stem makes storage simpler, but the base appears limited. This bundle’s weak point is the included accessories, especially its headphones and pinpointer.
Pros: Review reports easy assembly and portability · Review reports finds including rings, coins, and relics · Review describes it as beginner-friendly.
Cons: Review reports low-quality included headphones · Review says included pinpointer performance was disappointing.
Skip it if: you need a wide, stable base; this model has a limited base.
- Detector type:Conventional single search coil
- Target focus:Gold, coins, general-purpose
- Claimed depth:16 in (quarter)
- Coil size:—
- Ground balance:Ground balance included
- Target ID:—
CKG Treon Metal Detector
Serious detectorists seeking the best deep seeking metal detectors with control over settings can tune sensitivity, tones, ground balance, and discrimination on the CKG Treon. Its four detecting modes cover Coin & Treasure, Prospecting, All Metal, and Pinpointer searches. The 18.75 kHz frequency is aimed at sensitivity to small gold, coins, and jewelry, while the 11-inch DD coil supports wider scanning and stable target identification.
The Treon01 has an IP68 waterproof design for beach, sand, soil, and shallow-water searches up to 5 m. Its 2500 mAh battery is rated for up to 20 hours of active use. The claimed maximum depth is 2 m, but detection depth varies with target size, metal type, soil minerals, and detector quality, so treat that figure as conditional. Its advanced settings offer useful control, though they may take more attention to adjust than a detector with fewer settings.
Skip it if: you want fixed presets and no way to adjust settings.
- Detector type:—
- Target focus:Coins, treasure, gold, jewelry
- Claimed depth:Up to 2 m / 78 in
- Coil size:11 in
- Ground balance:Ground balance
- Target ID:Stable target identification
Hazlewolke 14-Inch Metal Detector
Unlike the Metal Detector 12-Inch DD Coil, this detector suits you if you want wide coverage from a larger coil. Its 14-inch Double-D coil sweeps a broad path, which can help you cover open ground with fewer passes. The DD90 uses VLF technology and has ground balancing capability, with five functional modes and adjustable settings for different detecting needs. The claimed detection depth is 13 inches. Actual depth varies with target size, metal type, soil minerals, and detector quality.
The Hazlewolke 14-Inch Metal Detector is a large unit with a yellow finish and dimensions of 14 x 11 x 48 inches. Its Double-D coil and ground balancing are aimed at separating targets and handling changes in soil, while five modes let you adapt settings as you search. The 13-inch depth claim is not a promise: soil minerals and the target itself affect how deep a detector can reach. Its large coil favors open ground over tight spaces where a smaller coil is easier to maneuver.
Skip it if: a 14-inch coil would be awkward to maneuver in the tight spaces you search.
- Detector type:Double-D Technology
- Target focus:Hidden treasures
- Claimed depth:13 in
- Coil size:14-inch Double-D coil
- Ground balance:Ground balancing capability
- Target ID:—
SAKOBS Metal Detector
For beginners seeking a portable park or beach detector, this foldable model adjusts from 26 to 47 inches. It weighs 2.7 pounds, and its 11-inch IP68 waterproof DD coil suits wet sand and shallow-water searches. Four modes cover All Metal, Disc, Jewelry, and Pinpointer searches. A backlit LCD displays nine target types, while the claimed depth reaches up to 12.8 inches under suitable conditions.
The detector comes with headphones, a shovel, and a carrying backpack, making it easier to pack for trips. Owners praise its light carry, sensitivity, useful accessories, and detailed instructions. Its adjustable shaft and folding design help keep transport manageable, and the target display gives you information as you search. Audio can be very loud near metal, especially through the included headphones, so expect sharp signals during close finds.
Pros: Owners describe it as lightweight and easy to carry · Owner feedback praises its sensitivity · Included shovel and backpack are reported as useful.
Cons: Audio can be very loud near metal, especially through headphones.
Skip it if: headphone signals at high volume would make searching uncomfortable.
- Detector type:Conventional single-coil detector
- Target focus:Coins, jewelry, relics, general targets
- Claimed depth:Up to 12.8 in
- Coil size:11 in DD coil
- Ground balance:—
- Target ID:Backlit LCD, 9 target types
ULHUND Metal Detector
Beginners can adjust the ULHUND Pro300’s stem from 22 to 60 inches to suit many user heights. Its foldable control box and built-in cable make it easier to pack, while the included carrying bag, headphones, shovel, and two 9V batteries cover basic outings. The 11-inch IP68 waterproof DD coil suits beaches, wet grass, and shallow water edges; the control box isn’t waterproof. A backlit LCD displays target ID, and four modes include All Metal, DISC, Notch, and Pinpoint, with nine target metal types.
Unfold it, adjust the stem, and start searching without installing a cable. At 2.4 pounds, it’s built for carrying and swinging on beach, park, or backyard hunts. The 11-inch DD coil covers ground on each sweep, while Pinpoint mode helps locate a target before digging. Its waterproof coil can handle shallow water edges, but the control box must stay dry.
Skip it if: you need to submerge the detector, because its control box isn’t waterproof.
- Detector type:Single-coil conventional detector
- Target focus:Coins, relics, jewelry, general metals
- Claimed depth:12.8 in (claimed)
- Coil size:11 in
- Ground balance:—
- Target ID:Backlit LCD target ID
Metal Detector 12-Inch DD Coil
The 12-inch submersible DD coil suits beginners who want shallow-water coin and relic hunts. The BOXTREN M55 has five modes: All-Metal, Disc, Notch, Memory, and Pinpoint, plus an LCD with target ID and depth. Its 12-inch DD coil is rated for shallow-water use; the control box is splash-proof, not submersible. The manufacturer claims a detection depth of up to 12.8 inches, but actual depth depends on the target and ground conditions. Depth depends on the target and ground conditions.
The stem adjusts from 20 to 53 inches and folds for transport. Two AA batteries provide up to 12 hours of use, and the kit includes headphones, a shovel, and a backpack. Five detection modes give you options for different targets, while the pinpoint mode helps locate a signal.
The backlit display and distinct tones offer visual and audio cues. Owners report that the headphones feel cheap, and long-term owner feedback is limited. Keep the control box above water while searching.
Pros: Review says large coil covers ground quickly · Review reports useful backlit display · Review reports five selectable detection modes.
Cons: Review notes limited long-term owner feedback · Review reports headphones feel cheap.
Skip it if: underwater use requires a submersible control box.
- Detector type:Conventional 12-inch DD coil
- Target focus:Coins, relics, gold, general use
- Claimed depth:12.8 in (manufacturer claim)
- Coil size:12 in DD coil
- Ground balance:Mineralized soil
- Target ID:Target ID and discrimination modes
Hazlewolke PX-17 Metal Detector
Buyers who want several search options will find four modes and pinpointing in the PX-17. Its 14-inch Double-D coil covers more ground per sweep, and the stated depth is up to 10 inches for a quarter. All Metal, DISC, Memory, and Jewelry modes let you change how you search, while pinpoint helps locate a target. It offers a flexible option among the best deep seeking metal detectors, though depth depends on the target and soil.
The adjustable stem ranges from 21.2 to 51.9 inches, and the backlit LCD displays settings. You can adjust sensitivity across five levels and choose from three audio presets. The coil is waterproof for beach or damp-ground searches, but the control box must stay dry. That limitation matters if you want to search in water rather than along its edge.
Skip it if: you plan to search underwater and need the control box to stay dry.
- Detector type:Double-D coil
- Target focus:Quarter
- Claimed depth:10 in
- Coil size:14 in
- Ground balance:—
- Target ID:—
Bebara Professional Metal Detector
The Bebara Professional Metal Detector suits night hunters, with a backlit LCD that keeps target information readable in low light. Its 10-inch IP68 coil covers wet ground, while the LCD displays target ID, depth, mode, sensitivity, and battery status. Five modes cover All Metal, Disc, Memory, Jewelry, and PP searches, and five sensitivity levels adjust to different ground conditions. The detector claims detection up to 15 inches, though actual depth depends on the target and soil.
It comes with two 9V alkaline batteries, headphones, a digging shovel, a battery case, and a backpack, so you can start with the included kit. The interface is designed for beginners and experienced detectorists, and the coil is waterproof for wet conditions. The control box is not waterproof, so keep it out of water even when the coil is submerged. Its 10-inch coil and claimed depth make it suited to covering ground while monitoring target information on the display.
Skip it if: you need to submerge the entire detector, since its control box is not waterproof.
- Detector type:5-Mode Upgraded DSP chip
- Target focus:All Metal, Disc, Memory, Jewelry, PP
- Claimed depth:15 in
- Coil size:10 in
- Ground balance:—
- Target ID:Target ID
ikiu Professional Metal Detector
The ikiu MD-1117 suits gold and silver hunters who want LCD-guided targeting in a simple detector. Among the best deep seeking metal detectors, this is a straightforward option with a large backlit LCD and four modes: All Metal, Notch, Memory, and PinPoint. A DSP chip and waterproof search coil support a claimed 10-inch depth. Target size, metal type, soil minerals, and detector quality affect detection depth. Adjustable sensitivity has 5 levels for tuning responses and reducing false alarms.
Assembly takes less than a minute without tools, and the stem adjusts from 36.6 to 47 inches. At 2.26 pounds, it’s designed to limit arm fatigue, and the IP68-rated coil suits beach, river, or rainy use. The control unit is not waterproof, so keep it out of water even when searching with the coil submerged. The red detector is also offered in yellow and dark red.
Skip it if: you need a submersible control unit; only the search coil is waterproof.
- Detector type:DSP chip
- Target focus:Gold, silver
- Claimed depth:10 in
- Coil size:—
- Ground balance:—
- Target ID:—
Deep Seeking Metal Detectors: Key Specs Side by Side
Here is how the 10 picks line up on detector type, target focus, claimed depth, coil size and target id. Cells marked with a dash are specs the maker leaves out of its listing.
| Pick | Detector type | Target focus | Claimed depth | Coil size | Target ID |
|---|---|---|---|---|---|
| Minelab X-Terra PRO Metal Detector | PRO-SWITCH engine | Treasure | — | — | 30 discrimination segments |
| PRO-Z60 Metal Detector | Conventional single search coil | Gold, coins, general-purpose | 16 in (quarter) | — | — |
| CKG Treon Metal Detector | — | Coins, treasure, gold, jewelry | Up to 2 m / 78 in | 11 in | Stable target identification |
| Hazlewolke 14-Inch Metal Detector | Double-D Technology | Hidden treasures | 13 in | 14-inch Double-D coil | — |
| SAKOBS Metal Detector | Conventional single-coil detector | Coins, jewelry, relics, general targets | Up to 12.8 in | 11 in DD coil | Backlit LCD, 9 target types |
| ULHUND Metal Detector | Single-coil conventional detector | Coins, relics, jewelry, general metals | 12.8 in (claimed) | 11 in | Backlit LCD target ID |
| Metal Detector 12-Inch DD Coil | Conventional 12-inch DD coil | Coins, relics, gold, general use | 12.8 in (manufacturer claim) | 12 in DD coil | Target ID and discrimination modes |
| Hazlewolke PX-17 Metal Detector | Double-D coil | Quarter | 10 in | 14 in | — |
| Bebara Professional Metal Detector | 5-Mode Upgraded DSP chip | All Metal, Disc, Memory, Jewelry, PP | 15 in | 10 in | Target ID |
| ikiu Professional Metal Detector | DSP chip | Gold, silver | 10 in | — | — |
Frequently Asked Questions
Are deep-seeking metal detectors suitable for beginners?
Yes, a deep-seeking detector can suit a beginner if its controls match your experience and targets. Start with straightforward modes and learn how ground minerals and target size affect signals, since depth claims don’t guarantee results in every soil type. More adjustable settings can offer control, but they take practice.
Can I use a deep-seeking metal detector on a beach?
Yes, some detectors are designed for beach searches, but you’ll need to match the detector to the beach conditions. Salt and mineral content can affect signals and depth, so treat depth displays as estimates rather than guarantees. A waterproof rating matters if you plan to search in water.
What accessories should I bring when using a deep-seeking metal detector?
Bring a digging tool, headphones, and a way to pinpoint the target if your detector doesn’t include that function. A pinpointer can narrow the search area after you dig, while headphones help you hear audio signals. Pack accessories around your site and target, and keep the detector’s coil and controls easy to reach.
How can I test a detector’s performance before searching?
Test it with known targets placed at measured depths in soil similar to your search site. Try targets of different sizes and metals, then compare signals and depth readings; mineralized soil can make size and depth estimates inaccurate. Use the results as a practical comparison, not a promise of performance on every target.
How do I choose between the metal detectors listed in this guide?
Choose by target size, terrain, and the controls you’ll use, then treat stated depths as conditional. Conventional coils suit smaller targets, while very large coils and two-box setups favor larger objects and can miss small targets. Also weigh ground handling, target ID, pinpointing, waterproofing, and portability against your search plans.
Conclusion
If coins and small finds are your priority, choose a conventional-coil detector; if you’re after large targets, consider a two-box system, which can miss smaller objects. Target size should lead your choice. For mineralized ground, give ground-handling features more weight than a depth claim, since soil can distort readings. Your next step is to decide what you’ll search for and where, then compare each model’s coil, modes, and target features against those conditions. Treat every stated depth as conditional, not a promise.
Sources
- minelab.com (minelab.com)
- garrett.com (garrett.com)
- garrett.com (garrett.com)
- garrett.com (garrett.com)
- garrett.com (garrett.com)
- noktadetectors.com (noktadetectors.com)
















