10 Best Metal Detector Search Coils for 2026

The Minelab EQX 11 Search Coil suits EQUINOX 600 and 800 users who need one coil for varied sites. For tight, trashy ground, consider the Coiltek 10×5 NOX Search Coil, Minelab M8 Search Coil, Garrett Viper Search Coil, or 4-inch Bounty Hunter Gold Nugget Search Coil. The Garrett PROformance DD Search Coil and Nokta LG24 Search Coil fit other compatible detectors. For open ground, the Minelab EQX 15 Search Coil suits EQUINOX users, and the Nokta Makro LG35 Search Coil suits Legend users.
Choose by detector compatibility, coil size, configuration, and the conditions you hunt. Small coils help separate nearby targets in clutter, while larger coils cover more ground per sweep.
Compatibility comes first: a coil’s fit depends on its listed detector family, not its size or brand.
The comparison table lists detector compatibility, coil dimensions, and waterproofing.
Our top picks for metal detector search coils
- Best Overall: Minelab EQX 11 Search Coil — suits equinox owners who want a coil for general detecting
- Best for Tight Trashy Sites: Coiltek 10×5 NOX Search Coil — fits equinox or X-Terra Pro users hunting tight, trashy areas
- Best for Mineralized Soil: Garrett PROformance DD Search Coil — gives ACE users a waterproof DD coil for wider coverage and mineralized soil
How to Choose a Metal Detector Search Coil
Confirm detector compatibility
Start with your detector’s model or family: a coil that fits one detector may not fit another. For example, Minelab lists the EQX06, EQX11, and EQX15 as EQUINOX accessory coils, while the EQUINOX 900 is supplied with the EQX11 and EQX06, and the 700 with the EQX11. That family-level fit information doesn’t mean every coil is suited to every model in the family.
Don’t choose by size or connector appearance alone. Look for the detector model or family in the coil’s compatibility details, and treat an accessory coil and a supplied coil as different categories. This avoids the common mistake of assuming that a coil fits simply because it comes from the same brand.
Match coil size to the site
Choose a smaller coil when you’ll work in tight spaces or around dense iron and other targets. EQUINOX owners reported that the 6-inch coil could isolate signals in iron and high-trash areas that the stock 11-inch coil missed. One owner also reported using higher sensitivity with a smaller coil to help offset depth loss in trash, an anecdotal comparison rather than a controlled test.
Expect a coverage trade-off. Owners said the 6-inch coil covered ground slowly and generally preferred the stock coil for depth and coverage. A Simplex SP24 owner reported better separation near iron but less depth than the stock coil, without a measured depth comparison. These are field reports, not controlled measurements, so use them to understand likely trade-offs rather than as guaranteed results.
Compare coil dimensions with the size and clutter of your usual sites: prioritize maneuverability and separation in confined, trashy spots, and coverage in open areas. A common mistake is choosing the largest coil for every site, even when tight target spacing makes separation more useful.
Choose a coil configuration
Match the configuration to your detector and intended use. The EQUINOX family includes round DD coils in different sizes. This information identifies the coils as DD, but provides no basis for ranking DD, concentric, and mono designs overall.
When comparing coils, check the configuration named for the specific coil, then compare its size and detector fit. Performance depends on the soil and targets, so choose a configuration suited to your site. Use the configuration label as a filter alongside those factors.
Check waterproofing and depth limits
Separate coil suitability from the detector’s waterproof rating. Submersion limits vary by model: the EQUINOX 700 and 900 manuals specify waterproofing to 5 m (16 ft), IP68, while the EQUINOX 600 and 800 guide confirms that their supplied coil is waterproof. Use the stated limit for your detector and coil combination when deciding whether you can hunt in shallow water or need to stay on dry ground.
Don’t read a waterproof label as permission to submerge every detector to the same depth. Match the stated rating and depth limit to your planned conditions, and avoid assuming that a replacement coil changes the detector’s own limits.
Consider weight and included protection
Detector weight is not coil weight: published EQUINOX figures of 1.34 kg (2.95 lb) for the 600/800 and 1.27 kg (2.8 lb) for the 700/900 are detector weights. Don’t use those figures to compare how heavy accessory coils feel during a long hunt.
For comfort, consider how the coil’s size and your detector’s total setup fit your usual hunt. Also look for included protection, such as a coil cover, when comparing options; it can help shield the coil’s underside from wear. Keep comfort and protection separate from compatibility: neither makes an otherwise unsuitable coil fit your detector.
| Minelab EQX 11 Search Coil | ![]() | Best Overall | Detector compatibility: EQUINOX 600/800 | Coil dimensions: 11 × 11 × 11 in | Waterproofing: Waterproof | VIEW LATEST PRICE | Read Our Analysis |
| Coiltek 10×5 NOX Search Coil | ![]() | Best for Tight Trashy Sites | Detector compatibility: Equinox 600/700/800/900; X-Terra Pro | Coil dimensions: 10 × 5 in; elliptical | Waterproofing: 10 ft (600/800); 16.5 ft (700/900, X-Terra Pro) | VIEW LATEST PRICE | Read Our Analysis |
| Garrett PROformance DD Search Coil | ![]() | Best for Mineralized Soil | Detector compatibility: ACE 150, 250, 350 | Coil dimensions: 8.5 × 11 in | Waterproofing: Waterproof; depth limit unstated | VIEW LATEST PRICE | Read Our Analysis |
| Bounty Hunter Gold Nugget Search Coil | ![]() | Best for Small Gold | Detector compatibility: Most Bounty Hunter detectors | Coil dimensions: 4-inch search coil | Waterproofing: Waterproof | VIEW LATEST PRICE | Read Our Analysis |
| Minelab M8 Search Coil | ![]() | Best for MANTICORE Tight Sites | Detector compatibility: Minelab MANTICORE | Coil dimensions: 8 × 5.5 in elliptical | Waterproofing: 5 m (16 ft) | VIEW LATEST PRICE | Read Our Analysis |
| Garrett Viper Search Coil | ![]() | Best for Vortex Trashy Sites | Detector compatibility: Garrett Vortex detectors | Coil dimensions: 6 x 11 in | Waterproofing: Submersible to 16 ft | VIEW LATEST PRICE | Read Our Analysis |
| Nokta LG24 Search Coil | ![]() | Best for Legend Versatility | Detector compatibility: Nokta The Legend | Coil dimensions: 9.5 x 6 in | Waterproofing: Waterproof | VIEW LATEST PRICE | Read Our Analysis |
| Minelab EQX 15 Search Coil | ![]() | Best for Open Ground | Detector compatibility: Equinox 600/800/700/900 | Coil dimensions: 15 × 12 in | Waterproofing: 10 ft or 16 ft by model | VIEW LATEST PRICE | Read Our Analysis |
| Minelab V10X Search Coil | ![]() | Best for X-TERRA Mineralized Ground | Detector compatibility: Minelab X-TERRA PRO | Coil dimensions: 10 × 7 in | Waterproofing: Up to 16 ft (5 m) | VIEW LATEST PRICE | Read Our Analysis |
| Nokta Makro LG35 Search Coil | ![]() | Best for Legend Open Ground | Detector compatibility: Nokta Makro The Legend | Coil dimensions: 13.5 × 12.5 in | Waterproofing: Waterproof | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
Minelab EQX 11 Search Coil
Equinox owners who want one coil for varied sites get a strong all-round choice. The EQX 11 uses an 11-inch Double-D design for general detecting, with waterproof construction for wet conditions. It fits the EQUINOX 600 and 800.
Good stated stability and sensitivity support everyday use. A coil cover comes with it for added protection during regular handling.
Owners report less fatigue than with the 15-inch coil, and one long-term owner logged 820 hours on an 11-inch stock coil. Some Equinox owners report broken coil ears or support mounts, while another reported failure where the wire meets the coil. The included cover protects the coil, while those reported mount and wire failures are specific concerns to weigh.
Pros: Owners describe the 11-inch coil as capable for general detecting · Less fatigue than with the larger 15-inch coil · One long-term owner reported using an 11-inch stock coil for 820 logged hours.
Cons: Forum owners report broken coil ears or support mounts on some Equinox 11-inch coils · One owner reported an 11-inch coil failure where the wire met the coil.
An 11-inch coil can make it harder to separate nearby targets in tight, heavily trash-filled sites.
- Detector compatibility:EQUINOX 600/800
- Coil dimensions:11 × 11 × 11 in
- Coil configuration:Double-D
- Waterproofing:Waterproof
- Coil weight:—
- Included protection:Coil cover included
Coiltek 10×5 NOX Search Coil
Its 10 × 5-inch elliptical Double-D coil suits Equinox and X-Terra Pro users hunting tight, trashy sites. The compact footprint is built for maneuvering around clutter, with sensitivity and pinpointing aimed at separating targets in dense areas. The Coiltek 10×5 NOX Search Coil fits Equinox 600, 700, 800, and 900 detectors, plus the X-Terra Pro.
Its 0.94-pound weight keeps the coil light, and an attached skid plate protects its underside. The coil is submersible to 10 feet on the Equinox 600 and 800, or 16.5 feet on the 700, 900, and X-Terra Pro.
Owners report easy maneuvering in fields, useful separation at dense sites, and comfortable handling on the Equinox. The attached skid plate comes with the coil, and its Double-D design suits tight sweeps around nearby targets. One Equinox 900 owner reported chirping and needing lower sensitivity in some modes, while another reported stable performance in Park 1.
The 2-year warranty adds coverage, but owners also reported a loose-fitting coil cover and slightly different target IDs that led to digging more targets. The smaller footprint favors control in clutter over covering broad ground quickly.
Pros: Owner reported easy maneuvering in a field (2021) · Owner reported good separation in a dense site due to the smaller footprint (2022) · Owner described it as comfortable ergonomically on the Equinox (2023).
Cons: Owner reported target IDs differed slightly and said they had to dig more targets (2022) · Owner reported a loose-fitting coil cover and used zip ties to secure it (2021).
Choose another coil for broad, open-ground coverage; this one suits maneuvering through tight, trashy areas.
- Detector compatibility:Equinox 600/700/800/900; X-Terra Pro
- Coil dimensions:10 × 5 in; elliptical
- Coil configuration:Double-D (DD)
- Waterproofing:10 ft (600/800); 16.5 ft (700/900, X-Terra Pro)
- Coil weight:0.94 lb
- Included protection:Attached skid plate
Garrett PROformance DD Search Coil
For ACE 150, 250, and 350 users, the Double-D design suits mineralized soil and helps separate nearby targets. The Garrett PROformance DD Search Coil measures 8.5 × 11 inches and is waterproof, giving you broader coverage than a smaller coil. Owners report that it covers more ground per sweep than a concentric coil, with useful depth and pinpointing on ACE detectors.
At 1 lb, it’s a manageable replacement coil for an ACE setup. Owners report good performance on an ACE 250, though one owner said accurate target identification reached about 6 inches. Rough use was linked to hairline cracks and erratic signals, so a separate coil cover is a sensible addition. Its waterproof design and target separation make it suited to mineralized sites where adjacent targets are hard to distinguish.
Pros: Useful depth and pinpointing (2011) · It covers more ground per sweep (2011) · Good performance on an ACE 250 (2012).
Cons: Owner reported hairline cracks and erratic signals after rough use (2018) · Owner reported depth for accurate ID was about 6 in (2012).
This coil won’t work with detectors outside the ACE 150, 250, or 350 series.
- Detector compatibility:ACE 150, 250, 350
- Coil dimensions:8.5 × 11 in
- Coil configuration:Double-D (2019 manual)
- Waterproofing:Waterproof; depth limit unstated
- Coil weight:1 lb
- Included protection:—
Bounty Hunter Gold Nugget Search Coil
Unlike the Garrett Viper, the Bounty Hunter Gold Nugget suits small-gold hunters working tight, rocky ground. Its 4-inch waterproof coil is made for small targets and can reach places larger coils struggle to access, including rocky shorelines, bedrock, and tree roots. It works with most Bounty Hunter detectors and is designed for wet or muddy conditions. The listing claims it can detect coin-sized objects up to 4 inches deep, and describes discrimination between valuables and iron or aluminum.
At 0.1 lb, this compact coil is easy to maneuver through confined spots. Owners report using it in all-metal and discrimination modes, with improved target separation in trash and access between rocks and roots. Its small size does call for slower coverage, and an owner reports less depth than with a larger coil. That makes it a focused choice for picking through tight, debris-heavy ground rather than sweeping open areas quickly.
Pros: Easier access to tight spots · Forum owner reports improved target separation in trash · Detecting small targets.
Cons: Forum owner reports less depth than a larger coil.
Skip it if: you need a larger coil for faster coverage or greater depth.
- Detector compatibility:Most Bounty Hunter detectors
- Coil dimensions:4-inch search coil
- Coil configuration:—
- Waterproofing:Waterproof
- Coil weight:0.1 lb
- Included protection:—
Minelab M8 Search Coil
MANTICORE users hunting tight, trashy sites should choose the Minelab M8 for small targets. Its 8 × 5.5-inch elliptical Double-D design is sensitive to small targets and suits difficult terrain, busy sites, and beach searches for coins and jewelry. At 0.88 pounds with skidplate, it stays compact for close work, and its 16-foot waterproof rating supports detecting in shallow water.
The replacement skidplate is included, adding protection without a separate purchase. Owners report good target separation in busy sites, and say the coil fits tight areas and works around roots. One owner also reports sensitivity to tiny gold nuggets.
Its smaller detection field than the M11 can make it less suitable for covering big grassy fields, where owners say the M11 may be a better fit. For close, cluttered sites, its compact footprint and small-target sensitivity are the main advantages.
Pros: Good target separation in busy sites (2024) · It fits tight areas and around roots (2024) · Sensitivity to tiny gold nuggets (2024).
Cons: Smaller detection field than the M11, per an owner (2026) · The M11 may suit big grassy fields better (2026).
For big grassy fields, the M11 may be a better fit.
- Detector compatibility:Minelab MANTICORE
- Coil dimensions:8 × 5.5 in elliptical
- Coil configuration:Double-D
- Waterproofing:5 m (16 ft)
- Coil weight:0.88 lb with skidplate
- Included protection:Replacement skidplate included
Garrett Viper Search Coil
Owners report strong separation on coin-sized targets, making the Garrett Viper Search Coil a fit for Vortex users hunting trashy sites. Its narrow 6 × 11-inch DD design is intended for coins, jewelry, and relics in cluttered areas, iron patches, or tight spaces. Owners also describe it as easy to swing and well suited to iron-patch hunting.
It’s compatible with Garrett Vortex detectors and weighs just over 1 lb. The narrow DD profile helps separate targets in trash, while submersible to 16 feet makes it suitable for streams, lakes, and wet conditions. A searchcoil cover is included, along with a 3-year warranty.
Owners report that a large target can mask a smaller nearby target, and one owner reported temporary pinpointing trouble with a damp coil. Its light weight and cover suit frequent swings over rough ground.
Pros: Strong separation on coin-sized targets in trashy areas (2025) · Owner describes the coil as easy to swing (2026) · It fits iron-patch hunting well (2026).
Cons: A large target can mask a smaller nearby target (2025) · Owner reported a temporary pinpointing problem with a damp coil (2026).
This coil is limited to the Garrett Vortex line.
- Detector compatibility:Garrett Vortex detectors
- Coil dimensions:6 x 11 in
- Coil configuration:DD Viper
- Waterproofing:Submersible to 16 ft
- Coil weight:Just over 1 lb
- Included protection:Searchcoil cover included
Nokta LG24 Search Coil
A waterproof Double-D build suits Legend owners who want versatile coverage across parks, trash, and goldfields. The Nokta LG24 Search Coil measures 9.5 × 6 inches and weighs 0.88 lb, giving you a mid-size option for maneuvering around clutter. A coil cover and mounting hardware come included, and the coil fits the Nokta The Legend detector. Its waterproof construction suits wet detecting conditions, while the Double-D configuration supports the versatility Legend owners may want across different sites.
Mounting hardware and the cover are included, and owners report stable, maneuverable use in goldfield ground, plus park and school hunting. One owner also used it in high-EMI, iron-trash ground. Easy maneuverability can help in tight areas, though this coil covers less ground than a larger option.
Another owner reported EMI chatter while stationary at higher sensitivity, so expect that behavior can matter when you pause to inspect a target. Its 9.5 × 6-inch footprint favors control over the broader coverage of a larger coil.
Pros: Owner used it successfully in high-EMI, iron-trash ground (2024) · Owner described it as stable and easy to maneuver (2024) · Owner reported using it for park and school hunting (2025).
Cons: Owner reported EMI chatter when stationary at higher sensitivity (2024) · Owner reported coil-knock or falsing on one unit (2024).
Skip it if: you need broad coverage across open ground, since owners report limited coverage compared with a larger coil.
- Detector compatibility:Nokta The Legend
- Coil dimensions:9.5 x 6 in
- Coil configuration:Double-D
- Waterproofing:Waterproof
- Coil weight:0.88 lb
- Included protection:Coil cover included
Minelab EQX 15 Search Coil
Equinox users hunting open ground can cover more area per sweep with a larger coil. The Minelab EQX 15 Search Coil measures 15 × 12 inches and uses a Double-D configuration for broad coverage. It fits the Equinox 600, 800, 700, and 900, and owners report covering more ground with each sweep. Its included skidplate protects the coil, which weighs 1.46 lb with the plate.
It is designed for wide-open areas, where its footprint can cover ground quickly. Water depth limits are 10 ft with the 600 or 800 and 16 ft with the 700 or 900. Broad 15 × 12-inch coverage suits larger search areas, while the included protective skidplate adds a wear layer.
The coil can be harder to pinpoint with, leading to larger holes, and its size can make it less effective in trashy ground. Owners also report extra fatigue on long hunts and more difficulty moving it underwater.
Pros: Covering more ground per sweep (2020–2025 forum posts) · Some owners report good depth at beaches (2018 forum post) · One owner reports sensitivity to small items (2023 forum post).
Cons: Harder pinpointing and larger holes (2020 forum post) · Some owners report extra fatigue during long hunts (2023 forum post).
Skip it if: you mainly hunt trashy sites, where owners report reduced performance with this large coil.
- Detector compatibility:Equinox 600/800/700/900
- Coil dimensions:15 × 12 in
- Coil configuration:Double-D
- Waterproofing:10 ft or 16 ft by model
- Coil weight:1.46 lb with skidplate
- Included protection:Protective skidplate
Minelab V10X Search Coil
Its 10 × 7-inch Double-D coil suits X-TERRA PRO users hunting mineralized ground, where reduced ground response helps detect small targets. The medium elliptical coil is designed for heavily mineralized soil and works in wet conditions, including underwater to 16 feet (5 m). Its footprint covers more ground in open fields and beaches than a compact coil, making it a practical fit for longer searches across open areas.
It works as an add-on for the Minelab X-TERRA PRO, with a replacement skidplate included to protect the coil. The 16-foot submersion rating supports searches along beaches and riverbanks, while the small-target sensitivity helps with fine targets in mineralized soil. Its medium size is less suited to tight, trashy sites, where a smaller coil can work more easily around closely spaced targets. For open ground with mineralization or wet conditions, it combines coverage, target sensitivity, and coil protection in one setup.
Cons: No V10X-specific owner-reported weaknesses found in the reviewed forum results.
For tight, trashy ground, choose a compact coil instead.
- Detector compatibility:Minelab X-TERRA PRO
- Coil dimensions:10 × 7 in
- Coil configuration:Double-D elliptical
- Waterproofing:Up to 16 ft (5 m)
- Coil weight:—
- Included protection:Replacement skidplate included
Nokta Makro LG35 Search Coil
Nokta Makro The Legend users get open-ground coverage from this 13.5 × 12.5-inch coil. Its large Double-D design suits less-trashy ground, where the broad footprint helps you cover more area. The coil is waterproof, and a coil cover is included.
Owners report covering open ground, with some also describing strong signals on deep coins near the edge of the coil. The LG35 weighs 1.82 lb, a substantial load for long detecting sessions.
It fits The Legend, and the included cover protects the coil during use. Owners call it an all-around coil and report finding targets on ground they’d searched before. Its 13.5 × 12.5-inch footprint favors coverage over maneuvering in tight spots.
Some owners find pinpointing takes practice, and one reported trouble separating targets in a narrow area. The 1.82 lb weight can also feel heavy over long sessions, so this coil is better suited to open ground than confined, trashy sites.
Pros: One owner reported finding targets missed on previously searched ground · One owner reported strong signals on deep, edge-positioned coins · An owner called it an excellent all-around coil.
Cons: Owners describe the coil as heavy during long sessions · Some report less precise pinpointing than with smaller coils.
A coil suited to narrow, trashy spots can help separate nearby targets.
- Detector compatibility:Nokta Makro The Legend
- Coil dimensions:13.5 × 12.5 in
- Coil configuration:Double-D
- Waterproofing:Waterproof
- Coil weight:1.82 lb
- Included protection:Coil cover included
Metal Detector Search Coils: Key Specs Side by Side
Here is how the 10 picks line up on detector compatibility, coil dimensions, coil configuration, waterproofing and coil weight. Cells marked with a dash are specs the maker leaves out of its listing.
| Pick | Detector compatibility | Coil dimensions | Coil configuration | Waterproofing | Coil weight |
|---|---|---|---|---|---|
| Minelab EQX 11 Search Coil | EQUINOX 600/800 | 11 × 11 × 11 in | Double-D | Waterproof | — |
| Coiltek 10×5 NOX Search Coil | Equinox 600/700/800/900; X-Terra Pro | 10 × 5 in; elliptical | Double-D (DD) | 10 ft (600/800); 16.5 ft (700/900, X-Terra Pro) | 0.94 lb |
| Garrett PROformance DD Search Coil | ACE 150, 250, 350 | 8.5 × 11 in | Double-D (2019 manual) | Waterproof; depth limit unstated | 1 lb |
| Bounty Hunter Gold Nugget Search Coil | Most Bounty Hunter detectors | 4-inch search coil | — | Waterproof | 0.1 lb |
| Minelab M8 Search Coil | Minelab MANTICORE | 8 × 5.5 in elliptical | Double-D | 5 m (16 ft) | 0.88 lb with skidplate |
| Garrett Viper Search Coil | Garrett Vortex detectors | 6 x 11 in | DD Viper | Submersible to 16 ft | Just over 1 lb |
| Nokta LG24 Search Coil | Nokta The Legend | 9.5 x 6 in | Double-D | Waterproof | 0.88 lb |
| Minelab EQX 15 Search Coil | Equinox 600/800/700/900 | 15 × 12 in | Double-D | 10 ft or 16 ft by model | 1.46 lb with skidplate |
| Minelab V10X Search Coil | Minelab X-TERRA PRO | 10 × 7 in | Double-D elliptical | Up to 16 ft (5 m) | — |
| Nokta Makro LG35 Search Coil | Nokta Makro The Legend | 13.5 × 12.5 in | Double-D | Waterproof | 1.82 lb |
Frequently Asked Questions
Is an aftermarket search coil worth buying, or should I keep using the stock coil?
An aftermarket coil is worth considering if its size or shape better suits your usual sites. A smaller coil can separate targets in trash: Equinox owners reported that a 6-inch coil isolated signals in iron and high-trash areas that the 11-inch stock coil missed. The trade-off is slower coverage and less depth than the stock coil, based on owner reports.
Which search coil is best for finding small jewelry or gold?
For small targets in cluttered areas, choose a coil suited to your detector and site; coil size alone doesn’t establish how well it will find gold. For gold hunting, choose a coil made for your detector and intended conditions; coil size alone doesn’t establish how well it will find gold.
What search coil works best in mineralized soil or on a beach?
Choose a coil that fits your detector and the ground conditions, then compare its configuration and size. Double-D coils are available in several sizes for EQUINOX detectors, including 6-inch, 11-inch, and 15 × 12-inch options. Waterproofing depends on the detector and coil combination, so use the stated depth limit for your setup when hunting in water.
Should I choose a small, medium, or large coil for relic hunting?
Choose a small coil for tight, trashy sites and a larger coil for open ground where coverage matters more. Small coils can isolate targets in iron: Equinox owners reported that a 6-inch coil separated signals in high-trash areas that an 11-inch stock coil missed. The smaller coil may cover ground more slowly and give up depth compared with the stock coil.
Does a larger metal detector coil detect targets deeper?
A larger coil may suit open ground where you want to cover more area, but the available owner reports don’t establish a general depth advantage for larger coils. Owners preferred the 11-inch coil for depth and coverage over the 6-inch option. Treat that as a reported comparison, not a measured guarantee for every detector, target, or site.
Conclusion
Choose a coil by matching it to your detector and the ground you hunt most. If you work in tight, trashy spots, favor a smaller coil for maneuverability and target separation; for open ground, choose a larger coil to cover more area per sweep. Then compare the coil’s stated compatibility, configuration, waterproofing and included protection with your needs. That’s a practical way to narrow the best metal detector search coils to options suited to your setup and usual sites.
Sources
- Frequently Asked Questions | Minelab (usa.minelab.com)
- usa.minelab.com (usa.minelab.com)
- reddit.com (reddit.com)
- reddit.com (reddit.com)
- treasurenet.com (treasurenet.com)
- usa.minelab.com (usa.minelab.com)











