9 Best Metal Detector Coil Covers for 2026

The Zorvayne Garrett Coil Cover is the best overall for Garrett’s 8.5 × 11-inch DD coil. For Gold Monster coils, compare the GM10 and GM05 skidplates; for a Manticore M11, consider the shrxy cover or JJHVAA bumper. XP Deus owners can choose between the 11-inch shrxy cover and 9-inch HF cover, while the KONTONTY and black plastic accessory covers offer broader-fit options.
Match the cover to your detector, exact coil model, size and shape. Then compare its material and how it attaches, since a poor fit can leave the coil exposed or sit unevenly.
Clear trapped sand and grit regularly to limit abrasion beneath the cover.
The comparison table shows each option’s compatible coil, coil size and attachment style.
Our top picks for metal detector coil covers
- Best Overall: Zorvayne Garrett Coil Cover, for ace 350/400 owners with an 8.5 × 11
- Best Budget: Metal Detector Coil Cover Protective Plastic Accessory Black
- Best Waterproof Protection: Minelab Gold Monster GM10 Skidplate, for gold Monster 1000 GM10 owners seeking coil-bottom protection
How to Choose a Metal Detector Coil Cover
Match the cover to your exact coil
The best metal detector coil covers fit the coil they’re made for. Match the detector model and coil model first; a cover intended for a different coil can have the wrong outline or attachment points. Product names such as Minelab Gold Monster GM05 Skidplate identify a specific fit, so use the full model name rather than choosing by brand alone.
A coil cover, also called a skidplate or scuff cover, shields the coil from scratches, scuffs, and ground abrasion. Exact model fit comes first. Two coils from the same detector family aren’t interchangeable unless their model names match the cover’s stated compatibility.
Check coil size and shape
Compare the cover’s stated coil size and shape with your coil, not just the detector name. Coil covers are made for particular search-coil designs, including round and elliptical shapes. A close-looking outline is not enough: a mismatch can leave part of the coil exposed or make the cover sit poorly.
Pay attention to how a product describes the coil: a size such as 11 inches and a shape such as round DD are more useful than a broad label alone. Match both dimensions and outline. The shrxy XP Deus 11-Inch Coil Cover, for example, identifies an 11-inch round DD coil in its product name. Use that kind of specific description to compare against your own coil’s size and shape.
Choose protection for your terrain
Think about the surfaces you detect over and how often the coil is likely to scrape them. Covers are intended to protect against scuffs and ground abrasion, so they make sense where the coil regularly contacts rough ground. A smooth, open area may call for less abrasion protection than ground where you expect frequent contact with stones or hard surfaces.
Sand and grit can collect underneath a cover, so protection comes with a cleaning task. More contact means more abrasion risk. If you sweep close to the ground or work over rough surfaces, a fitted cover can take the scuffing that would otherwise reach the coil. Terrain also affects how often you’ll want to remove the cover and clear out trapped material.
Consider material and attachment
Check the cover material and how it attaches to the coil. Covers made of plastic, along with skidplates and scuff covers, offer details you can use to judge whether the construction suits your expected use. The GM05 and GM10 products are skidplates for Gold Monster coils; other products are coil covers.
Look for a design that fits securely without shifting during normal sweeping. A secure fit helps keep the coil covered. Avoid assuming that a similar-looking cover uses the same attachment or material: those details vary by product, and the exact model designation remains the better guide to fit. If you prefer a cover you can remove often, consider how easily its attachment lets you take it off and put it back on.
Plan to remove it for cleaning
Make cover removal part of routine coil care, especially after detecting in sand or gritty soil. Loose material trapped between the cover and coil can rub against the coil as you sweep, so clear the space underneath when debris builds up.
| Zorvayne Garrett Coil Cover | ![]() | Best Overall | Compatible coil: Garrett 8.5×11 DD; Ace 350/400 | Coil size: 8.5 × 11 in | Attachment style: Snap-on locking tabs | VIEW LATEST PRICE | Read Our Analysis |
| Minelab Gold Monster GM10 Skidplate | ![]() | Best Waterproof Protection | Compatible coil: Minelab Gold Monster 1000 GM10 | Coil size: 10 x 6 in | Attachment style: Easy installation | VIEW LATEST PRICE | Read Our Analysis |
| Minelab Gold Monster GM05 Skidplate | ![]() | Best for GM05 Coils | Compatible coil: Minelab Gold Monster 1000 GM 05 | Coil size: 5 in | Attachment style: Snap onto the coil | VIEW LATEST PRICE | Read Our Analysis |
| shrxy Manticore M11 Coil Cover | ![]() | Best for Manticore Owners | Compatible coil: Minelab Manticore M11 | Coil size: 11 in | Attachment style: Easy-fit; attachment type unstated | VIEW LATEST PRICE | Read Our Analysis |
| shrxy XP Deus 11-Inch Coil Cover | ![]() | Best for XP Deus 11-Inch Coils | Compatible coil: XP Deus 11-inch round coil | Coil size: 11 in | VIEW LATEST PRICE | Read Our Analysis | |
| KONTONTY Metal Detector Coil Cover | ![]() | Best Basic Replacement | Compatible coil: Wide range of metal detectors | Coil size: 11.26 x 8.66 x 0.24 in | Attachment style: Easy removal | VIEW LATEST PRICE | Read Our Analysis |
| JJHVAA Minelab M11 Coil Bumper | ![]() | Best for M11 Bumper Protection | Compatible coil: Minelab M11 Double-D round coil | Coil size: Double-D | Attachment style: Snap-on | VIEW LATEST PRICE | Read Our Analysis |
| Generic XP Deus HF Coil Cover | ![]() | Best for XP Deus HF Coils | Compatible coil: XP Deus 9 Inch HF | Coil size: 9 in | Attachment style: Snug-fit | VIEW LATEST PRICE | Read Our Analysis |
| Metal Detector Coil Cover Protective Plastic Accessory Black | ![]() | Best Budget | Compatible coil: Various brands and models | Coil size: 11.26 x 8.66 x 0.24 in | Attachment style: Easy install | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
Zorvayne Garrett Coil Cover
Scratches threaten Ace coils; this all-around choice suits Ace 350/400 owners with the matching DD coil. The Zorvayne Garrett Coil Cover fits Garrett’s 8.5 × 11-inch DD coil and uses snap-on locking tabs to hold its place. Its thin profile shields the coil from scratches and abrasion, while the smooth surface rinses or wipes clean. The black cover has listed dimensions of 11 × 8.5 × 0.01 inches.
Installation takes no tools: snap the cover on, then remove it the same way when you need to clean the coil. The limitation is its narrow fit: it’s made for the Garrett 8.5 × 11-inch DD coil and listed for Ace 350 and Ace 400 detectors, so it won’t suit other coil sizes or shapes.
Skip it if: your Garrett detector has a coil other than the 8.5 × 11-inch DD.
- Compatible coil:Garrett 8.5×11 DD; Ace 350/400
- Coil size:8.5 × 11 in
- Coil shape:Semi-elliptical
- Coil design:Semi-elliptical
- Cover material:—
- Attachment style:Snap-on locking tabs
Minelab Gold Monster GM10 Skidplate
Its IP44-rated waterproof build suits Gold Monster 1000 GM10 owners seeking extra protection around wet, dusty ground. The white plastic skidplate fits the elliptical, double-D 10×6-inch coil and helps shield its underside from bumps, falls, and wear. Its dust-resistant design adds another layer of protection during gold prospecting.
The skidplate is easy to install, and the package contains one. Plastic construction keeps the cover lightweight, while its white finish makes it easy to distinguish from the coil. Some owners find it sits loosely; one said sealant helped keep it in place.
Another felt the material seemed thin and might wear quickly with frequent ground scraping. IP44-rated waterproofing and dust resistance suit variable ground conditions, though a loose fit can mean extra securing work.
Pros: One owner described it as good quality (2022) · One owner said they believed theirs was genuine Minelab (2023) · Owner feedback identifies it as a replacement skidplate for Gold Monster coils (2024).
Cons: Owner said the material seemed thin and might wear quickly with frequent ground scraping (2023) · Owner reported the skidplate did not fit tightly and needed sealant to keep it on (2024).
Skip it if: your Gold Monster is fitted with anything other than the GM10 10×6 coil.
- Compatible coil:Minelab Gold Monster 1000 GM10
- Coil size:10 x 6 in
- Coil shape:Elliptical
- Coil design:Double-D
- Cover material:Plastic
- Attachment style:Easy installation
Minelab Gold Monster GM05 Skidplate
Gold Monster 1000 owners with GM05 coils get a dedicated replacement skidplate for this 5-inch setup. The Minelab Gold Monster GM05 Skidplate fits the round, double-D GM05 coil, making it a direct replacement for that specific coil. Its white finish and part number, 3011-0360, help distinguish it from other Gold Monster skidplates.
It’s designed to snap onto the coil, and one customer review from 2024 says it snapped on and fit well. A forum owner in 2025 reported difficulty keeping the cover attached; forum owners discussed tape or silicone to help secure covers. The 5-inch round shape and GM05 compatibility make the fit specific, while attachment may take extra attention if the cover doesn’t stay in place. This skidplate replaces the GM05 coil’s cover, not the coil itself.
Cons: One 2025 forum owner reported difficulty keeping the cover attached · Forum owners discussed using tape or silicone to secure covers.
Skip it if: your Gold Monster 1000 has anything but the 5-inch GM05 coil.
- Compatible coil:Minelab Gold Monster 1000 GM 05
- Coil size:5 in
- Coil shape:Round
- Coil design:Double-D
- Cover material:—
- Attachment style:Snap onto the coil
shrxy Manticore M11 Coil Cover
Unlike the JJHVAA Minelab M11 Coil Bumper, this cover suits Manticore M11 owners seeking coil-bottom protection. It fits the 11-inch round Manticore M11 DD coil and uses durable black material as a skid plate against rocks, debris, and wear. Its geometric pattern is intended to allow smooth ground contact while shielding the coil. The shrxy Manticore M11 Coil Cover is an easy-fit design, with quick attachment and removal for cleaning or when you need to take it off.
Installation is intended to be quick, and the cover can be removed for cleaning. In use, the skid plate takes contact and wear that would otherwise reach the coil, and its replaceable design gives you a way to refresh that protection. The main concern is retention: owners discussing Manticore skid plates report losing two in three months.
That report is about Manticore skid plates generally, rather than feedback on this shrxy cover specifically. Its role is simple: protect the M11 coil bottom from ground contact.
Pros: Owner discussion says a skid plate takes wear instead of the coil · Owner discussion describes the cover as a replaceable protection part · Listing says it can be removed for cleaning.
Cons: Owner discussion reports losing two Manticore skid plates in three months · No independent owner feedback found for this shrxy cover specifically.
Skip it if: your Manticore coil isn’t the round M11 DD.
- Compatible coil:Minelab Manticore M11
- Coil size:11 in
- Coil shape:Round
- Coil design:DD
- Cover material:Durable black material
- Attachment style:Easy-fit; attachment type unstated
shrxy XP Deus 11-Inch Coil Cover
XP Deus owners with an 11-inch round DD coil should choose this cover for a direct size-and-model match. The shrxy XP Deus Coil Cover is a skid plate with 11.02 x 11.02 x 0.2-inch dimensions and an orange finish. Its stated fit is the XP Deus’s round DD coil, giving you a cover made for that specific coil rather than a general detector accessory.
Owners report that some covers stay on during use and can be removed for cleaning. Other owners report covers falling off, wearing through, or splitting with frequent use. That gives you a practical reason to keep an eye on retention and wear as you use it.
Reports of splitting point to a durability concern with repeated use.
Pros: XP Deus 11-inch round DD fit is stated · Some covers stay on without issue (2019 forum post) · Cover can be removed for cleaning (2019 forum post).
Cons: Covers wearing through and splitting with frequent use (2019 forum post) · A cover falling off during use (2019 forum post).
Skip it if: your XP Deus has a coil other than the 11-inch round DD.
- Compatible coil:XP Deus 11-inch round coil
- Coil size:11 in
- Coil shape:Round
- Coil design:DD
- Cover material:—
- Attachment style:—
KONTONTY Metal Detector Coil Cover
For detectorists needing a simple replacement, this basic option suits coils within its stated wide-ranging compatibility. The KONTONTY cover measures 11.26 x 8.66 inches and uses black plastic to shield a detector coil. Its lightweight, portable design makes it easy to carry between detecting locations, and the cover is intended to help protect equipment from bumps, scratches, and other external factors. The dimensions give you a concrete starting point for comparing the cover with your coil.
The cover has an easy-removal attachment style, so you can take it off without a complicated fastening method. Its practical, portable design suits carrying as part of your detecting gear, while the black plastic construction keeps the protection simple. Its stated compatibility spans many detector brands and models, but the dimensions remain the specific fit details: this is a broad-fit replacement cover, not a named-model accessory.
Skip it if: your coil measures more than 11.26 x 8.66 inches.
- Compatible coil:Wide range of metal detectors
- Coil size:11.26 x 8.66 x 0.24 in
- Coil shape:—
- Coil design:—
- Cover material:Black plastic
- Attachment style:Easy removal
JJHVAA Minelab M11 Coil Bumper
Its 3D-printed, snap-on rim bumper suits M11 owners seeking added protection for the Minelab M11 Double-D round coil. It covers the outer rim, helping reduce surface wear and scuff marks during routine detecting.
The JJHVAA Minelab M11 Coil Bumper uses snap-on attachment without complex mounting hardware, allowing quick setup before a hunt. Its M11 Double-D fit is specific to the round coil. Made with 3D printing, it may have slight surface texture; its listed dimensions are 1 x 1 x 1 in. It’s a third-party replacement part designed to protect the coil’s perimeter.
Skip it if: you have anything but the Minelab M11 Double-D round coil.
- Compatible coil:Minelab M11 Double-D round coil
- Coil size:Double-D
- Coil shape:Double-D round
- Coil design:Double-D
- Cover material:—
- Attachment style:Snap-on
Generic XP Deus HF Coil Cover
Rough ground can scrape your XP Deus HF coil; this cover suits owners of the 9-inch HF coil. The Generic XP Deus HF Coil Cover fits the XP Deus 9-inch HF coil with a snug-fit attachment and flexible structure. It shields the coil’s bottom and edges from abrasion, scratches, and repeated contact with rocks, gravel, dirt, and uneven terrain.
Its flexible fit is designed to sit close without adding unnecessary bulk or weight as you move, making it practical for beaches, fields, forests, and rocky ground. The cover is made with 3D printing, and slight surface texture may be present. Protection focuses on the coil’s bottom and edges, so the cover leaves the rest of the detector exposed.
Skip it if: your XP Deus uses a coil other than the 9-inch HF model.
- Compatible coil:XP Deus 9 Inch HF
- Coil size:9 in
- Coil shape:—
- Coil design:XP Deus 9-inch HF coil
- Cover material:—
- Attachment style:Snug-fit
Metal Detector Coil Cover Protective Plastic Accessory Black
At 11.26 x 8.66 inches, this black cover suits budget-minded detector owners seeking a broad-fit accessory. Its plastic construction helps shield a coil from scratches and other damage, while the stated compatibility spans various brands and models. The fixed dimensions give you a clear footprint to compare with your coil, and the slim 0.24-inch thickness keeps the cover profile low.
The easy-install attachment is designed to make fitting and removing the cover simple. Broad brand compatibility doesn’t make this one-size cover suitable for every coil: its 11.26 x 8.66-inch footprint may not match a detector with a differently sized or shaped coil. For a coil that matches those dimensions, it offers basic plastic protection without extra bulk.
Skip it if: your coil measures less than the 11.26 x 8.66-inch cover footprint.
- Compatible coil:Various brands and models
- Coil size:11.26 x 8.66 x 0.24 in
- Coil shape:—
- Coil design:—
- Cover material:Plastic
- Attachment style:Easy install
Metal Detector Coil Covers: Key Specs Side by Side
Here is how the 9 picks line up on compatible coil, coil size, coil shape, coil design and attachment style. Cells marked with a dash are specs the maker leaves out of its listing.
| Pick | Compatible coil | Coil size | Coil shape | Coil design | Attachment style |
|---|---|---|---|---|---|
| Zorvayne Garrett Coil Cover | Garrett 8.5×11 DD; Ace 350/400 | 8.5 × 11 in | Semi-elliptical | Semi-elliptical | Snap-on locking tabs |
| Minelab Gold Monster GM10 Skidplate | Minelab Gold Monster 1000 GM10 | 10 x 6 in | Elliptical | Double-D | Easy installation |
| Minelab Gold Monster GM05 Skidplate | Minelab Gold Monster 1000 GM 05 | 5 in | Round | Double-D | Snap onto the coil |
| shrxy Manticore M11 Coil Cover | Minelab Manticore M11 | 11 in | Round | DD | Easy-fit; attachment type unstated |
| shrxy XP Deus 11-Inch Coil Cover | XP Deus 11-inch round coil | 11 in | Round | DD | — |
| KONTONTY Metal Detector Coil Cover | Wide range of metal detectors | 11.26 x 8.66 x 0.24 in | — | — | Easy removal |
| JJHVAA Minelab M11 Coil Bumper | Minelab M11 Double-D round coil | Double-D | Double-D round | Double-D | Snap-on |
| Generic XP Deus HF Coil Cover | XP Deus 9 Inch HF | 9 in | — | XP Deus 9-inch HF coil | Snug-fit |
| Metal Detector Coil Cover Protective Plastic Accessory Black | Various brands and models | 11.26 x 8.66 x 0.24 in | — | — | Easy install |
Frequently Asked Questions
Does a coil cover reduce detection depth or cause false signals?
A clean, correctly fitted cover is intended to shield the coil from scratches and ground abrasion; the available product details don’t establish that covers change detection depth or cause false signals. Remove trapped sand and grit, since debris under the cover can rub against the coil during sweeping.
When should I replace a worn or loose coil cover?
Replace a cover when it no longer sits securely or leaves the coil exposed to scuffs and ground abrasion. A loose cover can shift out of place; owner feedback on Gold Monster skidplates also describes covers that needed extra help staying attached.
Are OEM coil covers better than aftermarket covers?
A cover’s fit for your exact coil matters more than its brand label, because covers are made for specific coil models, sizes, and shapes. Compare compatibility and attachment details, then choose a cover that sits securely and suits the surfaces you detect over.
Can a coil cover affect detector performance in wet conditions?
The Minelab Gold Monster GM10 Skidplate has an IP44 rating and dust resistance. Keep grit from building up beneath any cover, where it can rub against the coil.
Can I use a coil cover with a replacement search coil?
Yes, if the cover matches the replacement coil’s exact model, size, and shape. A cover made for a different coil can have the wrong outline or attachment points, so compare the coil designation and dimensions rather than relying on the detector brand alone.
Conclusion
If you know your coil’s model, size, and shape, choose the cover that matches all three. If your coil belongs to a detector family with different coil options, use the full coil model name to narrow your choice, then compare the stated dimensions and outline. After fitting a cover, remove it and clear out trapped sand or grit when needed.
Sources
- https://usa.minelab.com/gm05-skidplate-for-gold-monster-1000-coils (usa.minelab.com)
- metaldetector.com (metaldetector.com)
- detectorhero.com (detectorhero.com)
- https://usa.minelab.com/tech-specs/gm10-skidplate-for-gold-monster-1000/ (usa.minelab.com)
- https://seriousdetecting.com/collections/treasurenet/products/garrett-8-5-x-11-dd-search-coil-cover-semi-elliptical-black (seriousdetecting.com)
- https://www.shrxy.com/products/metal-detector-11-round-dd-search-coil-cover-skid-plat-for-xp-deus (shrxy.com)















